Pular para o conteúdo
Merck
Todas as fotos(2)

Documentos Principais

144207

Sigma-Aldrich

Chlorodimethylsilane

98%

Sinônimo(s):

DMCS, Dimethylchlorosilane

Faça loginpara ver os preços organizacionais e de contrato

Selecione um tamanho

50 G
R$ 558,00

R$ 558,00


Check Cart for Availability

Solicite uma grande encomenda

Selecione um tamanho

Alterar visualização
50 G
R$ 558,00

About This Item

Fórmula linear:
(CH3)2SiHCl
Número CAS:
Peso molecular:
94.62
Beilstein:
1633434
Número CE:
Número MDL:
Código UNSPSC:
12352101
ID de substância PubChem:
NACRES:
NA.22

R$ 558,00


Check Cart for Availability

Solicite uma grande encomenda

densidade de vapor

4 (vs air)

Nível de qualidade

pressão de vapor

8.56 psi ( 20 °C)

Ensaio

98%

Formulário

liquid

Lim. expl.

20 %

índice de refração

n20/D 1.383 (lit.)

p.e.

34.7 °C (lit.)

pf

−111 °C (lit.)

densidade

0.852 g/mL at 25 °C (lit.)

temperatura de armazenamento

2-8°C

cadeia de caracteres SMILES

C[SiH](C)Cl

InChI

1S/C2H7ClSi/c1-4(2)3/h4H,1-2H3

chave InChI

YGHUUVGIRWMJGE-UHFFFAOYSA-N

Procurando produtos similares? Visita Guia de comparação de produtos

Aplicação

Used to prepare vinyldimethylsilanols for palladium-catalyzed cross-coupling with aryl iodides.[1]

Palavra indicadora

Danger

Frases de perigo

Classificações de perigo

Acute Tox. 3 Inhalation - Flam. Liq. 1 - Skin Corr. 1A - Water-react 3

Perigos de suplementos

Código de classe de armazenamento

4.3 - Hazardous materials which set free flammable gases upon contact with water

Classe de risco de água (WGK)

WGK 1

Ponto de fulgor (°F)

-9.4 °F - closed cup

Ponto de fulgor (°C)

-23 °C - closed cup

Equipamento de proteção individual

Faceshields, Gloves, Goggles


Escolha uma das versões mais recentes:

Certificados de análise (COA)

Lot/Batch Number

Não está vendo a versão correta?

Se precisar de uma versão específica, você pode procurar um certificado específico pelo número do lote ou da remessa.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 2

1 of 2

Kirti Ramesh et al.
Nature communications, 8(1), 1709-1709 (2017-11-24)
Understanding mollusk calcification sensitivity to ocean acidification (OA) requires a better knowledge of calcification mechanisms. Especially in rapidly calcifying larval stages, mechanisms of shell formation are largely unexplored-yet these are the most vulnerable life stages. Here we find rapid generation
Total synthesis of papulacandin D.
Scott E Denmark et al.
Journal of the American Chemical Society, 129(10), 2774-2776 (2007-02-20)
Paulina Teper et al.
Polymers, 12(1) (2020-01-23)
In this paper, we focus on the synthesis and characterization of novel stable nanolayers made of star methacrylate polymers. The effect of nanolayer modification on its antibacterial properties was also studied. A covalent immobilization of star poly(N,N'-dimethylaminoethyl methacrylate) (PDMAEMA) to
Vinícius Esteves Salgado et al.
Journal of dentistry, 59, 48-53 (2017-02-19)
To determine the optical and surface properties of model resin-based composites made with distinct nanoparticle sizes but equalized surface area, among them, before and after ageing. Model resin-based composites based on BisGMA/TEGDMA (50:50mol%) were loaded with three different fumed silica
Yue Huang et al.
Langmuir : the ACS journal of surfaces and colloids, 35(30), 9785-9793 (2019-07-10)
A series of sulfonate-based silicone surfactants with different hydrophobic groups were synthesized. Two synthetic strategies are introduced to permit exquisite control over the hydrophobic moieties. Solution behavior of these surfactants was investigated by surface tensiometry, electrical conductivity, transmission electron microscopy

Questions

1–2 of 2 Questions  
  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica