Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
推薦產品
產品名稱
红细胞裂解缓冲液Hybri-Max™, liquid, sterile-filtered, suitable for hybridoma
無菌
sterile-filtered
品質等級
形狀
liquid
技術
cell culture | hybridoma: suitable
雜質
endotoxin, tested
應用
生化/生理作用
成分
其他說明
法律資訊
儲存類別代碼
12 - Non Combustible Liquids
水污染物質分類(WGK)
nwg
閃點(°F)
Not applicable
閃點(°C)
Not applicable
客戶也查看了
-
What is the Department of Transportation shipping information for this product?
1 answer-
Helpful?
-
-
Is the BSA standard supplied with Product B6916, Bradford Reagent?
1 answer-
No, we do not supply the BSA standard with this reagent. We recommend using one of the following products: Protein Standard (BSA) Solution, (2 mg/mL), Product No. P0834 or Protein Standard (BSA) Solution, (1 mg/mL), Product No. P0914, if lower concentrations of protein are to be measured.
Helpful?
-
-
Can Product R7757, Red Blood Cell Lysing Buffer Hybri-Max™, be used to lyse cells that are trapped in whole tissue preparations?
1 answer-
Unfortunately, we have not verified the suitability of this lysis buffer for using with tissue samples and do not have a protocol.
Helpful?
-
-
Since you do not recommend Product R7757, Red Blood Cell Lysing Buffer Hybri-Max™, for treating whole blood, what protocol and products do you recommend for red cell lysis in a sample of whole blood?
1 answer-
The following is a suggested protocol:1. Centrifuge to remove plasma. A volume of 0.2 mL of whole blood will yield approximately 0.1 mL of packed cells. Add 0.1ml of 1X buffer such as HBSS (Hanks' balanced salt solution, Product No. H1641) or DPBS (Dulbecco's phosphate buffered saline solution, Product No. D1283), to 0.1 mL of the pelleted cells and resuspend the pellet.2. Add 1-2 mls of 0.1X diluent (or water) and quickly mix cells using the same pipette.3. After 15 seconds, quickly add a volume of 2X diluent in the amount used in step 2 and mix thoroughly. Dilute further with 1X diluent. Wash cells once with buffer.
Helpful?
-
-
In step 3 of your usage sheet for Product R7757, Red Blood Cell Lysing Buffer Hybri-Max™, you say to dilute this buffer with medium or "salt solution". What salt solution is appropriate?
1 answer-
Any balanced salt solution such as DPBS (Dulbecco's phosphate buffered saline) or HBSS (Hank's Balanced Salt Solution) may be used to dilute the buffer when following this procedure.
Helpful?
-
Active Filters
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務