跳轉至內容
Merck
全部照片(1)

重要文件

檢視所有文件

332461

Sigma-Aldrich

石墨

flakes

登入查看組織和合約定價
全部照片(1)

About This Item

經驗公式（希爾表示法）:
C
CAS號碼:
7782-42-5
分子量：:
12.01
EC號碼:
231-955-3
MDL號碼:
MFCD00144065
分類程式碼代碼:
12352300
PubChem物質ID:
24859898
NACRES:
NA.23
暫時無法取得訂價和供貨情況

形狀

flakes

品質等級

100

粒徑

+100 mesh (≥75% min)

mp

3652-3697 °C (lit.)

SMILES 字串

[C]

InChI

1S/C

InChI 密鑰

OKTJSMMVPCPJKN-UHFFFAOYSA-N

尋找類似的產品？ 前往 產品比較指南

相關類別

儲存類別代碼

11 - Combustible Solids

水污染物質分類（WGK）

nwg

閃點（°F）

Not applicable

閃點（°C）

Not applicable

個人防護裝備

dust mask type N95 (US), Eyeshields, Gloves

從最近期的版本中選擇一個：

分析證明 (COA)

Lot/Batch Number
SHBQ8334
SHBQ1020
MKBW0432V
SHBL3825
SHBL3822

未看到正確版本？

如果您需要一個特定的版本，您可以透過批號來尋找特定憑證。

搜尋 COA

已經擁有該產品？

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

Raghvendra Singh Yadav et al.
Nanomaterials (Basel, Switzerland), 9(4) (2019-04-19)
Herein, we presented electromagnetic interference shielding characteristics of NiFe2O4 nanoparticles-in-situ thermally-reduced graphene oxide (RGO)-polypropylene nanocomposites with the variation of reduced graphene oxide content. The structural, morphological, magnetic, and electromagnetic parameters and mechanical characteristics of fabricated nanocomposites were investigated and studied
Sicheng Wu et al.
Small (Weinheim an der Bergstrasse, Germany), 16(12), e1903397-e1903397 (2019-09-10)
An unprecedented microwave-based strategy is developed to facilitate solid-phase, instantaneous delamination and decomposition of graphite fluoride (GF) into few-layer, partially fluorinated graphene. The shock reaction occurs (and completes in few seconds) under microwave irradiation upon exposing GF to either "microwave-induced
Zheling Li et al.
ACS nano, 14(9), 10976-10985 (2020-07-01)
Liquid- phase exfoliation (LPE) is the principal method of producing two-dimensional (2D) materials such as graphene in large quantities with a good balance between quality and cost and is now widely adopted by both the academic and industrial sectors. The
Izabela Jurewicz et al.
Advanced functional materials, 30(31), 2002473-2002473 (2020-08-11)
High quality opal-like photonic crystals containing graphene are fabricated using evaporation-driven self-assembly of soft polymer colloids. A miniscule amount of pristine graphene within a colloidal crystal lattice results in the formation of colloidal crystals with a strong angle-dependent structural color
Tian Carey et al.
Nature communications, 8(1), 1202-1202 (2017-11-02)
Fully printed wearable electronics based on two-dimensional (2D) material heterojunction structures also known as heterostructures, such as field-effect transistors, require robust and reproducible printed multi-layer stacks consisting of active channel, dielectric and conductive contact layers. Solution processing of graphite and other
查看所有相關論文

文章

Novel Graphene‑Based Nanostructures Production, Functionalization, and Engineering

Novel Graphene‑Based Nanostructures Production, Functionalization, and Engineering

Questions

1–3 of 3 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  3. Please ket me know the flake size of this product

    1 answer

    1. The particle size of the product is found to be +100 mesh (≥75% min). This mesh size converts to approximately 0.149 mm.

      Helpful?

Reviews

No rating value

Active Filters

我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務