Przejdź do zawartości
Merck

Effects of lead-spiked sediments on freshwater bivalve, Hyridella australis: linking organism metal exposure-dose-response.

Aquatic toxicology (Amsterdam, Netherlands) (2014-03-01)
Chamani P M Marasinghe Wadige, Anne M Taylor, William A Maher, Rodney P Ubrihien, Frank Krikowa
ABSTRAKT

Lead entering aquatic ecosystems adsorbs to sediments and has the potential to cause adverse effects on the health of benthic organisms. To evaluate the freshwater bivalve Hyridella australis as a bioindicator for sediment toxicity, their exposure-dose and response to lead contaminated sediments (< 0.01, 205 ± 9 and 419 ± 16 μg/g dry mass) was investigated in laboratory microcosms using 28 day exposures. Despite high concentrations of lead in the sediments, organisms accumulated low concentrations of lead in their tissues after 28 days of exposure (low treatment: 2.2 ± 0.2 μg/g dry mass, high treatment: 4.2 ± 0.1 μg/g dry mass), however, accumulated lead concentrations in lead exposed organisms were two fold (low treatment) and four fold (high treatment) higher than that of unexposed organisms (1.2 ± 0.3 μg/g dry mass). Accumulation of lead by H. australis may have occurred as analogues of calcium and magnesium. Labial palps accumulated significantly more lead than other tissues. Of the lead accumulated in the hepatopancreas, 83%-91% was detoxified and stored in metal rich granules. The proportions and concentrations of lead in this fraction increased with lead exposure, which suggests that lead detoxification pathway plays an important role in metal tolerance of H. australis. The biologically active lead was mainly present in the mitochondrial fraction which increased with lead exposure. Total antioxidant capacity of H. australis significantly decreased while lipid peroxidation and lysosomal membrane destabilation increased with lead exposure. This study showed a clear lead exposure-dose-response relationship and indicates that H. australis would be a good biomonitor for lead in freshwater ecosystems.

MATERIAŁY
Numer produktu
Marka
Opis produktu

Sigma-Aldrich
Lead, powder, −325 mesh, ≥99% trace metals basis
Lead, foil, light tested, 50x50mm, thickness 0.03mm, 99.99+%
Lead, rod, 100mm, diameter 6.35mm, 99.95%
Lead, foil, not light tested, 50x50mm, thickness 0.015mm, 99.99+%
Lead, wire reel, 0.5m, diameter 1.0mm, as drawn, 99.99+%
Lead, microfoil, disks, 25mm, thinness 0.25μm, specific density 266.7μg/cm2, permanent mylar 3.5μm support, 99.99+%
Lead, wire reel, 2m, diameter 0.5mm, as drawn, 99.99+%
Lead, foil, not light tested, 50x50mm, thickness 0.01mm, 99.99+%
Lead, microfoil, disks, 25mm, thinness 1.0μm, specific density 1047.8μg/cm2, permanent mylar 3.5μm support, 99.99+%
Lead, foil, light tested, 50x50mm, thickness 0.015mm, 99.99+%
Lead, foil, not light tested, 50x50mm, thickness 0.004mm, 99.99+%
Lead, foil, 2m coil, thickness 0.016mm, as rolled, 96% (sn 1.5%, sb 2.5%)
Lead, foil, 4mm disks, thickness 0.008mm, 99.99+%
Lead, foil, 25mm disks, thickness 0.15mm, as rolled, 99.95%
Lead, foil, 15mm disks, thickness 0.025mm, 99.99+%
Lead, foil, 4mm disks, thickness 0.55mm, as rolled, 100%
Lead, foil, 15mm disks, thickness 0.25mm, as rolled, 99.99+%
Lead, foil, 4mm disks, thickness 1.0mm, as rolled, 99.99+%
Lead, foil, 100x100mm, thickness 0.5mm, as rolled, 99.99+%
Lead, foil, 25mm disks, thickness 0.04mm, 99.99+%
Lead, foil, 8mm disks, thickness 0.006mm, 99.99+%
Lead, foil, 10mm disks, thickness 1.0mm, as rolled, 99.99+%
Lead, foil, 500x1000mm, thickness 0.5mm, as rolled, 99.95%
Lead, foil, 1000x1000mm, thickness 0.5mm, as rolled, 99.95%
Lead, foil, 50x50mm, thickness 3.0mm, as rolled, 99.99+%
Lead, foil, 8mm disks, thickness 0.04mm, 99.99+%
Lead, foil, 10m coil, thickness 0.15mm, as rolled, 99.95%
Lead, foil, 25x25mm, thickness 1.0mm, as rolled, 99.99+%
Lead, foil, 1m coil, thickness 0.25mm, as rolled, 99.95%
Lead, foil, 10mm disks, thickness 0.5mm, as rolled, 99.99+%