GVHP01300

PVDF Membrane Filter, 0.22 μm Pore Size

Durapore^®, filter diam. 13 mm, hydrophobic

• Synonim(y): Durapore^® Membrane Filter, 0.22 µm
• Kod UNSPSC: 40161507
• eCl@ss: 32031602
• NACRES: NB.24

Właściwości

• Materiały: PVDF membrane; plain filter; white filter
• Poziom jakości: 400
• sterylność: non-sterile
• Właściwości: hydrophobic
• producent / nazwa handlowa: Durapore^®; Millipore
• sustainability: Greener Alternative Product
• Parametry: ≥16 mL/min-cm² air flow rate ((Gurley)); >1 mL/min-cm² water flow rate (at 25inches Hg with methanol prewet); 85 °C max. temp.
• Średnica: 13 mm
• śr. filtra: 13 mm
• grubość: 125 μm , typical
• substancje ekstrahujące się grawimetrycznie: 0.5%
• współczynnik refrakcji: n/D 1.42
• Matryca: Durapore^®
• wielkość porów: 0.22 μm pore size; ≥65 % porosity
• pojemność: 150 μg/cm²
• punkt pęcherzykowania: ≥18 psi (1.24 bar), air with methanol
• kategoria ekologicznej alternatywy: Re-engineered
• Warunki transportu: ambient

Opis

Opis ogólny

Durapore^® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.

Features & Benefits
- Available in several pore sizes (both hydrophilic and hydrophobic varieties) to suit your application needs
- Durapore membrane filters have very low protein binding to minimize interaction with your sample and maximize recovery

Filter Code: GVHP

Filter Type: Screen filter

We are committed to bringing you Greener Alternative Products, which have been re-engineered to enable more sustainable research solutions. The inner & outer boxes containing the membrane discs are made from bio-circular material allocated using the ISCC mass balance approach. Click here for more information.

Zastosowanie

• Air sterilization
• Gas sterilization
• Solvent filtration

Inne uwagi

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: General laboratory filtration
• Intended Use: Retention or removal of biological contaminants
• Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informacje prawne

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Ta strona może zawierać tekst przetłumaczony maszynowo.