PTFE membranes have a maximum temperature limit of 130 °C. For applications requiring higher temperature ranges, Glass Fiber filters are recommended.
FGLP01300
PTFE Membrane Filter, 0.22 μm Pore Size
Fluoropore®, hydrophobic
Cechy związane ze zrównoważonym rozwojem
Synonim(y):
Fluoropore Membrane Filter
Zaloguj się, aby wyświetlić ceny organizacyjne i kontraktowe.
Wybierz wielkość
Zmień widok
| Rozmiar/SKU | Dostępność | Cena netto |
|---|---|---|
100 filters | Dostępne do wysyłki DZISIAJzKuehne + Nagel Sp. z o.o. | 1490,00 zł |
Informacje o tej pozycji
UNSPSC Code:
40161507
NACRES:
NB.24
eCl@ss:
32031602
Pore size:
0.22 μm pore size, 63 % porosity
Material:
PTFE membrane, plain filter, white filter
Feature:
hydrophobic
Diam.:
13 mm
Sterility:
non-sterile
1490,00 zł
Dostępne do wysyłki DZISIAJSzczegóły
Pomoc techniczna
Potrzebujesz pomocy? Nasz zespół doświadczonych naukowców chętnie Ci pomoże.
Pozwól nam pomócmaterial
PTFE membrane, plain filter, white filter
sterility
non-sterile
feature
hydrophobic
manufacturer/tradename
Fluoropore®, Millipore
sustainability
Sustainability features
parameter
2.5 air flow rate (L/hr-cm2 at 12 mbar (0.17 psi)), 130 °C max. temp. (Curling may occur at elevated temperatures)
diam.
13 mm
filter diam.
13 mm
thickness
128 μm , Typical
gravimetric extractables
≤0.5%
matrix
Fluoropore®
pore size
0.22 μm pore size, 63 % porosity
bubble point
≥1.21 bar (17.6 psi), air with 100% IPA at 23 °C
shipped in
ambient
General description
Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a polypropylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing "FHUP" are unlaminated, or produced without a backing.)
Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.
Features & Benefits:
- Biologically and chemically inert
- High porosity yields high flow rates
- Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples
Applications:
- Fluoropore Membrane: Clarifying Acids, Bases and Solvents; Air Monitoring; Filtering and Venting Gases; UV Spectroscopy
- Omnipore Membrane: Filtration of Aqueous Solutions, Clarifying Acids and Alkaline Solution
Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.
Features & Benefits:
- Biologically and chemically inert
- High porosity yields high flow rates
- Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples
Applications:
- Fluoropore Membrane: Clarifying Acids, Bases and Solvents; Air Monitoring; Filtering and Venting Gases; UV Spectroscopy
- Omnipore Membrane: Filtration of Aqueous Solutions, Clarifying Acids and Alkaline Solution
Filter Code: FGLP
Filter Type: Screen filter
We are committed to bringing you Greener Alternative Products, which have been re-engineered to enable more sustainable research solutions. The inner & outer boxes containing the membrane discs are made from bio-circular material allocated using the ISCC mass balance approach. Click here for more information.
Application
- Clarifying acids, bases, and solvents
- Filtering or venting gases
- UV spectroscopy
- Particle monitoring
- HPLC, UPLC, LC-MS/MS mobile phase filtration
- Microplastics analysis
Other Notes
Directions for Use
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: General laboratory filtration
- Intended Use: Retention or removal of biological contaminants
- Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Fluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Ta strona może zawierać tekst przetłumaczony maszynowo.
1 of 1
Ta pozycja | |||
|---|---|---|---|
| description Fluoropore®, hydrophobic | description Omnipore, filter diam. 25 mm, hydrophilic | description MF-Millipore™, filter diam. 25 mm, hydrophilic, white, Triton™-free | description Millipore Express®, filter diam. 25 mm, hydrophilic |
| manufacturer/tradename Fluoropore®, Millipore | manufacturer/tradename Millipore, Omnipore | manufacturer/tradename Millipore, MF-Millipore™ | manufacturer/tradename Millipore Express® |
| pore size 0.22 μm pore size, 63 % porosity | pore size 80 % porosity, 0.2 μm pore size | pore size 75 % porosity, 0.22 μm pore size | pore size 0.22 μm pore size |
| diam. 13 mm | diam. 25 mm | diam. 25 mm | diam. 25 mm |
| parameter 2.5 air flow rate (L/hr-cm2 at 12 mbar (0.17 psi)), 130 °C max. temp. (Curling may occur at elevated temperatures) | parameter 130 °C max. temp. | parameter 2 L/min-cm2 air flow rate, 75 °C max. temp., 18 mL/min-cm2 water flow rate | parameter 15 mL/min water flow rate at 690 mbar (10 psi) |
| material white filter, PTFE membrane, plain filter | material plain filter, white filter, PTFE membrane | material white filter, mixed cellulose esters (MCE) membrane, plain filter | material polyethersulfone membrane, white filter, plain filter |
| sterility non-sterile | sterility non-sterile | sterility non-sterile | sterility non-sterile |
Still not finding the right product?
Explore all of our products under PTFE Membrane Filter, 0.22 μm Pore Size
Wybierz jedną z najnowszych wersji:
Masz już ten produkt?
Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.
-
Despite having PTFE high temperature stability, why these filters have max. temp 130 deg. C
1 answer-
Helpful?
-