Saltar al contenido
Merck
Todas las fotos(1)

Documentos clave

Ver Toda la documentación

38534

Sigma-Aldrich

Polylactic acid

Mw ~60,000

Sinónimos:

Poly(2-hydroxypropionic acid)

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Número de CAS:
26100-51-6
Número MDL:
MFCD00081867
Código UNSPSC:
12162002
NACRES:
NA.23
En este momento no podemos mostrarle ni los precios ni la disponibilidad

Formulario

solid

Nivel de calidad

100

caducidad

limited shelf life, expiry date on the label

mol peso

Mn ~30,000
Mw ~60,000

cadena SMILES

[O-]C(=O)C(O)C.[H+]

InChI

1S/C3H6O3/c1-2(4)3(5)6/h2,4H,1H3,(H,5,6)

Clave InChI

JVTAAEKCZFNVCJ-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

Descripción general

Polylactic acid(PLA) is a biodegradable polyester synthesized from lactic acid monomer via ring opening polymerization. Owing to its excellent thermal, mechanical and barrier properties, it is widely used in the field of tissue engineering, drug delivery, and orthopedic devices.

Aplicación

Polylactic acid can be used to prepare tubular scaffolds via the electrospinning method. These scaffolds are applicable in vascular tissue engineering.

It can be used to prepare PLA/polyvinyl alcohol wound dressing membrane through electrospinning and coating method. The coating of PLA improves the mechanical strength of nanofiber and acts as a protective layer to control the release of drug to the wound site.

It can also be used to synthesize free-standing, flexible ultra-thin PLA nanofilms which can act as a matrix for adhesion, spreading, and proliferation of skeletal muscle cells.

Características y beneficios

  • Biocompatibility
  • Lower toxicity
  • Low cost
  • Better encapsulation

Producto relacionado

Referencia del producto
Descripción
Precios

911593

NanoFabTx™ microfluidic - nano, device kit for synthesis of 100-200 nm nanoparticles and liposomes

911860

NanoFabTx™ microfluidic - micro, device kit for synthesis of 1-5 μm particles

911879

NanoFabTx™ microfluidic - micro, device kit for synthesis of 10-30 μm particles

909637

NanoFabTx™ PLGA-nano, for synthesis of 100 and 200 nm particles

912212

NanoFabTx™ PLGA-micro, for synthesis of 10-30 um particles

912220

NanoFabTx™ PLGA-micro, for synthesis of 1-5 μm particles

920436

NanoFabTx™ PEG-PLA drug formulation screening kit, for synthesis of PEGylated nanoparticles

915408

NanoFabTx™ PEGylated nanoparticle formulation screening kit

917796

NanoFabTx™ PEG-PLGA drug formulation screening kit, for synthesis of PEGylated nanoparticles

918881

NanoFabTx™ PEG-PCL drug formulation screening kit, for synthesis of PEGylated nanoparticles

918075

NanoFabTx™ PLA-nano, for synthesis of 100 and 200 nm particles

Código de clase de almacenamiento

11 - Combustible Solids

Clase de riesgo para el agua (WGK)

WGK 3

Punto de inflamabilidad (°F)

Not applicable

Punto de inflamabilidad (°C)

Not applicable

Equipo de protección personal

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
BCCM8146
BCCM8144
BCCM4836
BCCM4837
BCCM1900

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Tong Chen et al.
Carbohydrate polymers, 92(2), 1124-1132 (2013-02-13)
Core-shell structured multifunctional nanocarriers (NCs) of ZnO quantum dots-conjugated gold nanoparticles (Au NPs) as core and amphiphilic hyperbranched block copolymer as shell were synthesized for targeted anticancer drug delivery. The amphiphilic hyperbranched block copolymer contained poly(l-lactide) (PLA) inner arm and
Huan Zhou et al.
Materials science & engineering. C, Materials for biological applications, 33(4), 2302-2310 (2013-03-19)
Fibrous bionanocomposites consisting of amorphous magnesium phosphate (AMP) nanospheres and polylactic acid (PLA) were fabricated by electrospinning. There are two important signatures of this paper. First, AMP, as an alternative to well-known calcium phosphate (CaP) materials, is added to PLA
Zhenxing Fan et al.
Environmental technology, 33(19-21), 2369-2374 (2013-02-12)
Biological nitrate removal using wheat straw and polylactic acid (PLA) as both carbon source and biofilm support was investigated. The results showed that biofilm could develop on the surface of wheat straw within 15 d, the denitrification rate was 0.067
L Pearce McCarty et al.
The Journal of bone and joint surgery. American volume, 95(6), 507-511 (2013-02-15)
A variety of complications associated with the use of poly-L-lactic acid (PLLA) implants, including anchor failure, osteolysis, glenohumeral synovitis, and chondrolysis, have been reported in patients in whom these implants were utilized for labral applications. We report on a large
Paul S Rosen et al.
Compendium of continuing education in dentistry (Jamesburg, N.J. : 1995), 34(1), 34-38 (2013-04-05)
This retrospective case series reports on the use of a polylactic acid barrier that was left exposed in the process of socket preparation for the placement of dental implants. A retrospective chart review found 43 patients with 48 extraction sockets
Ver todos los artículos relacionados

Artículos

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Electrospinning: Enabling Nanostructured Materials

Electrospinning technique applications discussed, emphasizing control of nanofibers and assembly into 3D architectures.

Questions

1–3 of 3 Questions  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  3. Hi, I'd like to know the Appearance (Form and color) of the PLA and the water content. Thank you.

    1 answer

    1. There is no appearance form or color specification for this product. However, historical information suggests this item is in the form of a powder to small rod or granule that is white to light beige in color. These properties are not quality guaranteed as the specification is not listed. The material is not tested for moisture content.

      Helpful?

Reviews

No rating value

Active Filters

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico