コンテンツへスキップ
Merck
  • Characterization of large surface area polymer monoliths and their utility for rapid, selective solid phase extraction for improved sample clean up.

Characterization of large surface area polymer monoliths and their utility for rapid, selective solid phase extraction for improved sample clean up.

Journal of chromatography. A (2015-08-04)
Esme Candish, Hans-Jürgen Wirth, Andrew A Gooley, Robert A Shellie, Emily F Hilder
要旨

While polymer monoliths are widely described for solid phase extraction (SPE), appropriate characterization is rarely provided to unravel the links between physical characteristics and observed advantages and disadvantages. Two known approaches to fabricate large surface area polymer monoliths with a bimodal pore structure were investigated. The first incorporated a high percentage of divinyl benzene (PDVB) and the second explored hypercrosslinking of pre-formed monoliths. Adsorption of probe analytes; anisole, benzoic acid, cinnamic acid, ibuprofen and cortisone were investigated using frontal analysis and the SPE performance was compared with particulate adsorbents. Frontal analysis of anisole described maximum adsorption capacities of 164mgg(-1) and 298mgg(-1) for hypercrosslinked and PDVB adsorbents, respectively. The solvated state specific surface area was calculated to be 341 and 518m(2)g(-1) respectively. BET revealed a hypercrosslinked surface area of 817m(2)g(-1), 2.5 times greater than in the solvated state. The PDVB BET surface area was 531m(2)g(-1), similar to the solvated state. Micropores of 1nm provided the enhanced surface area for hypercrosslinked adsorbents. PDVB displayed a pore size distribution of 1-6nm. Frontal analysis demonstrated the micropores present size exclusion for the larger probes. Recovery of anisole was determined by SPE using 0.4 and 1.0mLmin(-1). Recovery for PDVB remained constant at 90%±0.103 regardless of the extraction flow rate suggesting extraction performance is independent of flow rate. A more efficient sample purification of saccharin in urine was yielded by PDVB due to selective permeation of the small pores.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
リン酸, 85 wt. % in H2O, 99.99% trace metals basis
Sigma-Aldrich
塩酸 溶液, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
塩酸, 36.5-38.0%, BioReagent, for molecular biology
Sigma-Aldrich
リン酸, crystalline, ≥99.999% trace metals basis
Supelco
塩酸 溶液, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
イブプロフェン, ≥98% (GC)
Sigma-Aldrich
アセトニトリル, anhydrous, 99.8%
Sigma-Aldrich
塩酸, SAJ first grade, 35.0-37.0%
Sigma-Aldrich
メタノール, JIS special grade, ≥99.8%
Sigma-Aldrich
塩酸, JIS special grade, 35.0-37.0%
Sigma-Aldrich
塩化鉄(III), sublimed grade, ≥99.9% trace metals basis
Sigma-Aldrich
リン酸, BioUltra, ≥85% (T)
Sigma-Aldrich
トルエン, anhydrous, 99.8%
Sigma-Aldrich
塩酸 溶液, 1 M
Sigma-Aldrich
塩化鉄(III), anhydrous, powder, ≥99.99% trace metals basis
Sigma-Aldrich
メタノール, anhydrous, 99.8%
Sigma-Aldrich
塩酸 溶液, ~6 M in H2O, for amino acid analysis
Sigma-Aldrich
安息香酸, ACS reagent, ≥99.5%
Sigma-Aldrich
メタノール, SAJ first grade, ≥99.5%
Sigma-Aldrich
塩酸 溶液, 0.1 M
Sigma-Aldrich
塩酸 溶液, 6 M
Sigma-Aldrich
塩酸 溶液, 12 M
Sigma-Aldrich
塩化水素 溶液, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
ギ酸, ≥95%, FCC, FG
Sigma-Aldrich
リン酸, ≥85 wt. % in H2O, ≥99.999% trace metals basis
Sigma-Aldrich
塩酸 溶液, 2 M
Sigma-Aldrich
コルチゾン, ≥95%
Sigma-Aldrich
安息香酸, ≥99.5%, FCC, FG
Supelco
イブプロフェン
Sigma-Aldrich
スチレン, ReagentPlus®, contains 4-tert-butylcatechol as stabilizer, ≥99%