コンテンツへスキップ
Merck

Application of the Fenton process in the elimination of helminth eggs.

Journal of water and health (2014-12-05)
Sandra Isabel Escobar-Megchún, Hugo Alejandro Nájera-Aguilar, Magaly González-Hilerio, Javier Gutiérrez-Jiménez, Rubén Fernando Gutiérrez-Hernández, María Neftalí Rojas-Valencia
要旨

This study relates to a method for evaluating the degradation efficiency of Ascaris lumbricoides eggs through a Fenton reaction, using hydrogen peroxide (H2O2) at 100, 250, and 500 mg/L, ferrous sulfate (FeSO4) at 458 mg/L Fe(2+) and pH values of 3, 4.5, and 6. The experiments were conducted according to a 3(2) experimental design, with 1:1, 3:1, and 5:1 (H2O2/Fe(2+)) molar ratios. The oxidation and flocculation stages were performed at 130 rpm during 2 hours and at 25-30 rpm during 20 min, respectively. As a result of the Fenton reaction, an average of 91.2% Ascaris lumbricoides egg degradation was achieved at pH 6 using a 500 mg/L dose of H2O2 and a 3:1 (H2O2/Fe(2+)) molar ratio. Thus, this process is an alternative for eliminating parasites that are resistant to conventional disinfection processes and significantly reduces the human health hazard they represent.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
硫酸鉄(II) 七水和物, ReagentPlus®, ≥99%
Sigma-Aldrich
硫酸鉄(II) 七水和物, ACS reagent, ≥99.0%
Sigma-Aldrich
硫酸鉄(II) 七水和物, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, 99.5-104.5% (manganometric)
Sigma-Aldrich
硫酸鉄(II) 七水和物, BioReagent, suitable for cell culture, suitable for insect cell culture, ≥99%
Sigma-Aldrich
過酸化水素 溶液, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Carbonyl iron, ≥97% Fe basis
Millipore
過酸化水素 溶液, 3%, suitable for microbiology
Sigma-Aldrich
硫酸鉄(II) 七水和物, suitable for plant cell culture, ≥99%
Sigma-Aldrich
鉄, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
鉄, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
過酸化水素 溶液, JIS special grade, 30.0-35.5%
Sigma-Aldrich
過酸化水素 溶液, SAJ first grade, ≥30.0%
Sigma-Aldrich
鉄, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
鉄, chips, 99.98% trace metals basis
Sigma-Aldrich
鉄, wire, diam. 1.0 mm, ≥99.9% trace metals basis
鉄, foil, 100x100mm, thickness 0.25mm, hard, 99.5%
Sigma-Aldrich
鉄, foil, thickness 0.25 mm, ≥99.99% trace metals basis
Sigma-Aldrich
硫酸鉄(II) 七水和物, SAJ first grade, 98.0-102.5%
鉄, wire reel, 0.5m, diameter 1.0mm, as drawn, 99.99+%
鉄, foil, 100x100mm, thickness 0.125mm, as rolled, 99.99+%
鉄, foil, 300x300mm, thickness 0.1mm, hard, 99.5%
鉄, tube, 200mm, outside diameter 8.0mm, inside diameter 5mm, wall thickness 1.5mm, annealed, 99.5%
鉄, rod, 200mm, diameter 25mm, as drawn, 98+%
鉄, rod, 100mm, diameter 100mm, as drawn, armcO« soft ingot 99.8%
鉄, foil, 100x100mm, thickness 0.5mm, hard, 99.5%
Sigma-Aldrich
硫酸鉄(II) 七水和物, JIS special grade, 99.0-102.0%
鉄, rod, 50mm, diameter 5.0mm, as drawn, 99.99+%
鉄, rod, 150mm, diameter 6.0mm, as drawn, 99.99+%
鉄, foil, 150x150mm, thickness 1.5mm, as rolled, 99.5%
鉄, foil, 100x100mm, thickness 1.0mm, as rolled, 99.5%