This is a Swagelok fitting and 1/8" refers to the external (outside) diameter of the copper or stainless steel tubing. Linked below is a connector that can be used. Please contact your local technical service group if you need more information on how to connect Swagelok fittings.
https://www.sigmaaldrich.com/product/supelco/22014
503185
Carbon Dioxide Trap
volume 100 cc, 1/8 in. fitting
Sinonimo/i:
CO2 TRAP 100CC, 1/8IN FITTINGS
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Scegli un formato
1 EA
328,00 €
Scegli un formato
Cambia visualizzazione
1 EA
328,00 €
About This Item
Numero CE:
Codice UNSPSC:
12000000
Prodotti consigliati
Volume
100 cc
Raccordi
1/8 in. fitting
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Categorie correlate
Descrizione generale
Sodium hydroxide nonfibrous silicate material is universally accepted for its high absorptive capacity and indicating properties for carbon dioxide. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required. As carbon dioxide is absorbed, the greenish-brown material turns white because of the formation of sodium carbonate. The trap body is constructed of borosilicate glass, and the fittings are nickel-plated and have sintered stainless steel frits.
A moisture trap should be installed downstream from this unit to absorb the moisture that is produced.
Note: Exercise extreme caution when refilling the trap due to the caustic nature of the absorbent.
Dimensions:
A moisture trap should be installed downstream from this unit to absorb the moisture that is produced.
Note: Exercise extreme caution when refilling the trap due to the caustic nature of the absorbent.
Dimensions:
- 100 cc Traps: 123/4 in. (32.4 cm) long x 13/4 in. (44 mm) diameter
- 250 cc Traps: 171/2 in. (44.4 cm) long x 2 in. (51 mm) diameter
Applicazioni
It may be used to connect combustion oven and GCMS separator, for transfer of the gas into MS inlet system which monitors isotope-ratio.[1]
Avvertenze
Danger
Indicazioni di pericolo
Classi di pericolo
Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A
Codice della classe di stoccaggio
8B - Non-combustible corrosive hazardous materials
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges
Scegli una delle versioni più recenti:
Certificati d'analisi (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documenti section.
Se ti serve aiuto, non esitare a contattarci Servizio Clienti
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Isotope-ratio-monitoring gas chromatography-mass spectrometry.
Matthews, D. E., and J. M. Hayes.
Analytical Chemistry, 50.11, 1465-1473 (1978)
-
When it means 1/8 fitting, does it mean I can connect it with a tube with internal diameter of 1/8 or the external diameter has to be 1/8?
1 risposta-
Utile?
-
-
Does the product include an indicator for the consumption of sodium oxides?
1 risposta-
Upon the absorption of CO2, the greenish-brown material turns white due to the formation of sodium carbonate. It is designed to remove CO2 from gases used in various applications, such as carbon-hydrogen determinations, analyses of respiratory gases, and especially in quantitative organic micro-analyses. The sodium hydroxide non-fibrous silicate trapping medium is widely recognized for its high absorptive capacity and indicating properties. Typically, this material will absorb 20-30% of its weight in carbon dioxide before replacement of the saturated material is required.
Utile?
-
Filtri attivi
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
