Ugrás a tartalomra
Merck

768618

Sigma-Aldrich

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)

dry re-dispersible pellets

Szinonimák:

Orgacon DRY, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)

Bejelentkezésa Szervezeti és Szerződéses árazás megtekintéséhez


About This Item

MDL-szám:
UNSPSC kód:
12352103
NACRES:
NA.23

Forma

dry re-dispersible pellets

Minőségi szint

ellenállás

200-450 Ω/sq

mp

>300 °C

Looking for similar products? Látogasson el ide Útmutató a termékösszehasonlításhoz

Általános leírás

A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer (CP) that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It is a low cost CP that is produced with physical appearance (for example dispersible pellets). The following are the properties that make PEDOT:PSS a viable polymer in organic electronics:
  • good optical properties
  • high conductivity
  • functionalization of nanomaterials
  • high thermal stability
  • easy processing

Alkalmazás

Orgacon DRY is specifically useful for water sensitive formulations containing UV curable monomer (suitable with small amount of water) and pre-polymer based formulations.

Orgacon DRY pellets can be re-dispersed in organic solvents such as ethanol. The resulting dispersion can be used in coating - or ink - formulations targeted for different applications.

Allow retention of PEDOT/PSS key properties in polar organic solvents; such as Ethanol; Surface Resistance: 200~450 Ohm/square; Visual Light Transmission: ~85%
PEDOT:PSS can be used as a conductive material with a high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic printable electronics, textile electronics, electrochemical storage and supercapacitors, and lithium ion batteries.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

Fizikai tulajdonságok

  • Active chemical PEDOT/PSS
  • Visual appearance blue-grey pellets
  • Water content max. 15 % under 50% RH; 22°C
  • Shelf life 24 month in storage conditions

Elkészítési megjegyzés

When spin-coated using S300 EtOH (contains less than 3.5% wt. H20) as the solvent; the Visual Light Transmission (VLT) according to ASTM D 1003 (excludes substrate) is 85%; and the Surface Resistance is 450 Ohm/square.

Jogi információk

Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.

Piktogramok

Corrosion

Figyelmeztetés

Danger

Figyelmeztető mondatok

Óvintézkedésre vonatkozó mondatok

Veszélyességi osztályok

Eye Dam. 1

Tárolási osztály kódja

11 - Combustible Solids

WGK

WGK 3

Lobbanási pont (F)

Not applicable

Lobbanási pont (C)

Not applicable


Válasszon a legfrissebb verziók közül:

Analitikai tanúsítványok (COA)

Lot/Batch Number

Nem találja a megfelelő verziót?

Ha egy adott verzióra van szüksége, a tétel- vagy cikkszám alapján rákereshet egy adott tanúsítványra.

Már rendelkezik ezzel a termékkel?

Az Ön által nemrégiben megvásárolt termékekre vonatkozó dokumentumokat a Dokumentumtárban találja.

Dokumentumtár megtekintése

Foldable Textile Electronic Devices Using All-Organic Conductive Fibers.
Miura H, et al.
Advanced Engineering Materials, 16(5), 550-555 (2014)
Wet-spinning of PEDOT: PSS/functionalized-SWNTs composite: a facile route toward production of strong and highly conducting multifunctional fibers.
Jalili R, et al.
Scientific reports, 3(18), 3438-3438 (2013)
Synthesis and optimization of PEDOT: PSS based ink for printing nanoarrays using Dip-Pen Nanolithography.
Wagner M, et al.
Synthetic Metals, 181(18), 64-71 (2013)
Three dimensional cellular architecture of sulfur doped graphene: self-standing electrode for flexible supercapacitors, lithium ion and sodium ion batteries.
Islam MM, et al.
Journal of Material Chemistry A, 5(11), 5290-5302 (2017)
Exploiting high quality PEDOT: PSS-SWNT composite formulations for wet-spinning multifunctional fibers.
Jalili R, et al.
Journal of Materials Chemistry, 22(48), 25174-25182 (2012)

Cikkek

A detailed article on conducting polymer materials for flexible organic photovoltaics (OPVs) applications.

Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.

Progress in Organic Thermoelectric Materials & Devices including high ZT values of >0.2 at room temperature by p-type (PEDOT:PSS) & n-type (Poly[Kx(Ni-ett)]) materials are discussed.

Find advantages of inorganic interface layer inks for organic electronic & other applications.

Összes mutatása

Tudóscsoportunk valamennyi kutatási területen rendelkezik tapasztalattal, beleértve az élettudományt, az anyagtudományt, a kémiai szintézist, a kromatográfiát, az analitikát és még sok más területet.

Lépjen kapcsolatba a szaktanácsadással