Přejít k obsahu
Merck
Všechny fotografie(2)

Key Documents

View All Documentation

739324

Sigma-Aldrich

PEDOT:PSS

greener alternative

high-conductivity grade, 1.5% aqueous dispersion, neutral pH

Synonyma:

Orgacon™ N-1005, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)

Přihlásitk zobrazení cen stanovených pro organizaci a smluvních cen
Všechny fotografie(2)

About This Item

MDL number:
MFCD07371079
UNSPSC Code:
12352103
NACRES:
NA.23

product name

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), 1.5% in H2O, neutral pH, high-conductivity grade

grade

high-conductivity grade

Quality Level

100

form

liquid

greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

concentration

1.5% in H2O

resistance

<100 Ω/sq, >70% visible light transmission (40 μm wet)

refractive index

n20/D 1.335

pH

5-7

viscosity

<100 cP(22 °C)

density

0.982 g/mL at 25 °C

greener alternative category

Enabling,

storage temp.

2-8°C

Hledáte podobné produkty? Navštivte Průvodce porovnáváním produktů

General description

Aqueous surfactant-free dispersion of PEDOT:PSS neutralized to pH >5. Suitable for preparation of pH-neutral transparent conductive films printed electronics applications (e.g. hole injection layers). A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. PEDOT:PSS is majorly used in organic electronics due to the properties such as:
  • low band gap
  • good optical properties
  • high conductivity
  • low redox potential
  • easy processing
  • tunable film forming ability

We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.

Application

PEDOT:PSS can be used as an electrode material that forms a layered structure with a high mobility for charge carriers. It can be used for a wide range of energy based applications, such as organic photovoltaics (OPVs), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs) and supercapacitors.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

Legal Information

Product of Agfa
Orgacon is a trademark of Agfa-Gevaert N.V.

pictograms

Health hazardCorrosion
GHS08,GHS05

signalword

Danger

Hazard Classifications

Eye Dam. 1 - Repr. 1B - Skin Irrit. 2

Storage Class

6.1D - Non-combustible acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

Osvědčení o analýze (COA)

Vyhledejte osvědčení Osvědčení o analýze (COA) zadáním čísla šarže/dávky těchto produktů. Čísla šarže a dávky lze nalézt na štítku produktu za slovy „Lot“ nebo „Batch“.

Již tento produkt vlastníte?

Dokumenty související s produkty, které jste v minulosti zakoupili, byly za účelem usnadnění shromážděny ve vaší Knihovně dokumentů.

Navštívit knihovnu dokumentů

Optimizing polymer tandem solar cells.
Jan Gilot et al.
Advanced materials (Deerfield Beach, Fla.), 22(8), E67-E71 (2010-03-11)
Materials for Energy Harvesting and Storage
Zardetto V, et al.
Material Matters, 9(4), 771-5765 (2014)
Bolognesi M, et al.
Organic Photonics and Photovoltaics, 1(4), 1-10 (2013)
High efficiency, fully inkjet printed organic solar cells with freedom of design
Eggenhuisen TM, et al.
Journal of Material Chemistry A, 3(14), 7255-7262 (2015)
Roll-to-Roll Slot-Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors
Galagan Y, et al.
Energy Technology, 3(8), 834-842 (2015)
Zobrazit všechny související dokumenty

Sortimentní položky

Conducting Polymer Materials for Flexible OPV Applications: Orgacon™ PEDOT : PSS

A detailed article on conducting polymer materials for flexible organic photovoltaics (OPVs) applications.

New Conducting and Semiconducting Polymers for Plastic Electronics

In the field of organic printable electronics, such as OLEDs and organic photovoltaics (OPVs), improved organic conducting and semiconducting materials are needed. The progress in two fields is reviewed in this article.

Conductive Polymers for Advanced Micro- and Nano-fabrication Processes

Conducting polymers such as polyaniline, polythiophene and polyfluorenes are now much in the spotlight for their applications in organic electronics and optoelectronics.

Self healable PEDOT based film hydrogel and OECT devices

Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.

Zobrazit všechny

Náš tým vědeckých pracovníků má zkušenosti ve všech oblastech výzkumu, včetně přírodních věd, materiálových věd, chemické syntézy, chromatografie, analytiky a mnoha dalších..

Obraťte se na technický servis.