Saltar al contenido
Merck
Todas las fotos(1)

Documentos

SMP8A25NB6

Millipore

Milligard® PES 1.2/0.8 µm, OptiScale® Capsule

OptiScale® 25, filtration area 3.5 cm2, pore size 1.2/0.8 μm

Sinónimos:

OptiScale 25 Milligard PES 1.2/0.8 μm NB

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

UNSPSC Code:
23151806

material

polyethersulfone membrane
polypropylene
polypropylene support
polypropylene vent cap

Quality Level

400

sterility

non-sterile

sterilization compatibility

autoclavable compatible

product line

OptiScale® 25

feature

hydrophilic

manufacturer/tradename

OptiScale®

parameter

0 bar max. differential pressure (Reverse)
4.14 bar max. differential pressure (60 psi) at 25 °C (Forward)
60 psi max. inlet pressure (4.1 bar)

technique(s)

prefiltration: suitable

L

3.9 cm (1.52 in.)

W

1.21 in.

diam.

3.1 cm (1.2 in.)

filtration area

3.5 cm2

impurities

<0.25 EU/mL bacterial endotoxins (LAL test, per device; aqueous extraction; meeting requirements of USP <85>, EP 2.6.14 and JP 4.01)

matrix

Milligard® PES

pore size

1.2/0.8 μm pore size

fitting

female Luer-Lok® inlet connection
 male Luer-Lok® outlet connection
 (Female Luer-Lok® Inlet/Male Luer Slip Outlet)

cartridge code

not applicable

General description

Device Configuration: Capsule

Other Notes

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

  • Organism Retention: Bacterial
  • Mode of Action: Filtration (size exclusion)
  • Application: Protein purification
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation and wetting sections of OPTISCALE®-25 user guide
  • Storage Statement: Please refer OPTISCALE®-25 user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

Devices tested and meet requirements of USP <78> for large volume parenterals.
Sterilization Method
Capsule integrity was maintained after 1 autoclave cycle of 60 minutes at 123 °C.

Analysis Note

This product was tested and passes the USP test for particulates in injectables.

Legal Information

Luer-Lok is a registered trademark of Becton-Dickinson & Co.
MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OptiScale is a registered trademark of Merck KGaA, Darmstadt, Germany

¿No encuentra el producto adecuado?  

Pruebe nuestro Herramienta de selección de productos.

Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Artículos

Aseptic Filter Formats: Selection Guide

Aseptic filters are offered in disposable capsules and cartridge formats. This guide will help you find the right format for your bioburden control.

Membrane Prefilters Improve Sterilizing Filter Capacity and Process Economics in Bioprocessing

Prefilters can be used throughout bioprocessing to remove to remove particulates, improve quality and protect sterilizing filters and downstream unit operations.

Contenido relacionado

Prefiltration & Bioburden Control

Learn how prefilters and bioburden control can improve the efficiency of downstream purification by removing particulates and protecting unit operations.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico