Direkt zum Inhalt
Merck
  • Membrane-integrated hybrid system for the effective treatment of ammoniacal wastewater of coke-making plant: a volume reduction approach.

Membrane-integrated hybrid system for the effective treatment of ammoniacal wastewater of coke-making plant: a volume reduction approach.

Environmental technology (2014-06-25)
Ramesh Kumar, Parimal Pal
ZUSAMMENFASSUNG

Nanofiltration (NF) of ammoniacal wastewater containing phenol and cyanide has been investigated for effective separation of these hazardous pollutants and for the subsequent downstream chemical treatment resulting in valuable by-product generation. Four different types of composite polyamide commercial NF membranes (Sepro, USA) were tested under different operating conditions including transmembrane pressure and recovery rate (RR). At a transmembrane pressure of 15 bar, the achieved rejection of cyanide and phenol were 95% and 93%, respectively (concentrated stream) when the permeate contained 85% of ammonium-N. A high flux of 120 L m-2 h-1 was achieved during NF at a concentrated mode, with a volumetric cross-flow rate of 800 L h-1 at a pH of 10.0. The RR was 60% for the NF 1 membrane. Fenton's reagents (7.0 and 3.75 g L-1 H202 and FeSO4 . 7H20, respectively) were used to degrade more than 99% of pollutants present in the concentrated stream. In the permeate side, 97% of NH4+ -N was precipitated out as struvite by using Mg2+ : NH4 : PO+4 in 1:1:1 molar ratio at pH 9.0.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Wasserstoffperoxid -Lösung, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Wasserstoffperoxid -Lösung, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Eisen, ≥99%, reduced, powder (fine)
Sigma-Aldrich
Wasserstoffperoxid-Lösung, 30% (w/w), puriss. p.a., reag. ISO, reag. Ph. Eur.
Sigma-Aldrich
Phenol -Lösung, BioReagent, Equilibrated with 10 mM Tris HCl, pH 8.0, 1 mM EDTA, for molecular biology
Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Phenol -Lösung, BioReagent, Saturated with 0.01 M citrate buffer, pH 4.3 ± 0.2, for molecular biology
Sigma-Aldrich
Phenol, ≥99%
Sigma-Aldrich
Wasserstoffperoxid -Lösung, purum p.a., ≥35% (RT)
Sigma-Aldrich
Carbonyleisen, ≥97% Fe basis
Sigma-Aldrich
Phenol, puriss. p.a., ACS reagent, reag. Ph. Eur., 99.0-100.5%
Millipore
Wasserstoffperoxid -Lösung, 3%, suitable for microbiology
Sigma-Aldrich
Eisen, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Eisen, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
Phenol, natural, 97%, FG
Sigma-Aldrich
Eisen, powder, −325 mesh, 97%
Sigma-Aldrich
Verflüssigtes Phenol, ≥89.0%
Supelco
Phenol -Lösung, certified reference material, 500 μg/mL in methanol
Sigma-Aldrich
Phenol, BioUltra, for molecular biology, TE-saturated, ~73% (T)
Supelco
Wasserstoffperoxid -Lösung, ≥30%, for trace analysis
Sigma-Aldrich
Phenol, for molecular biology
Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications
Sigma-Aldrich
Wasserstoffperoxid -Lösung, 34.5-36.5%
Sigma-Aldrich
Eisen, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Supelco
Phenol -Lösung, 5000 μg/mL in methanol, certified reference material
Supelco
Wasserstoffperoxid -Lösung, 30 % (w/w), for ultratrace analysis
Sigma-Aldrich
Eisen, chips, 99.98% trace metals basis
Sigma-Aldrich
Eisen, wire, diam. 1.0 mm, ≥99.9% trace metals basis