Direkt zum Inhalt
Merck
  • The luminescent characterization of (Sr, Ca)2SiO4:Eu2+ nanopowders synthesized by a co-precipitation method.

The luminescent characterization of (Sr, Ca)2SiO4:Eu2+ nanopowders synthesized by a co-precipitation method.

Journal of nanoscience and nanotechnology (2013-07-19)
Jun Seong Lee, Young Jin Kim
ZUSAMMENFASSUNG

(Sr, Ca)2SiO4:Eu2+ nanopowders were prepared by a co-precipitation method, and then the effects of Ca2+ ions on the structural and luminescent properties were investigated. The pure Sr2SiO4:Eu2+ powders were perfectly composed of the beta-phase, whereas the substitution of Ca2+ ions led to the beta --> alpha' phase transition. The photoluminescence spectra of Sr2SiO4:Eu2+ exhibited two excitation bands at around 330 and 375 nm assigned to Eu(I) and (II) sites, respectively, resulting in two emission bands at around 473 and 543 nm. Meanwhile, the dominant peak wavelengths of the emission spectra of (Sr, Ca)2SiO4:Eu2+ could be tuned, depending on the cation ratio of Ca2+ to Sr2+. The substitution of Ca2+ ions for Sr2+ ions caused the red-shift of the emission peaks of Sr(2-x)Ca(x)SiO4:Eu2+ powders with increasing Ca2+ content (x = 0-1.0) due to the increase in the crystal field strength.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Titan(IV)-oxid, nanopowder, 21 nm primary particle size (TEM), ≥99.5% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Anatase, nanopowder, <25 nm particle size, 99.7% trace metals basis
Sigma-Aldrich
LUDOX® HS-40 kolloidales Siliziumdioxid, 40 wt. % suspension in H2O
Sigma-Aldrich
Siliciumdioxid, nanopowder, 10-20 nm particle size (BET), 99.5% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, puriss., meets analytical specification of Ph. Eur., BP, USP, 99-100.5%
Sigma-Aldrich
Titan(IV)-oxid, Anatase, powder, 99.8% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, ReagentPlus®, ≥99%
Sigma-Aldrich
LUDOX® AS-40 kolloidales Siliziumdioxid, 40 wt. % suspension in H2O
Sigma-Aldrich
Titan(IV)-oxid, Rutil, powder, <5 μm, ≥99.9% trace metals basis
Sigma-Aldrich
Silicium(IV)-oxid, nanoparticles, mesoporous, 200 nm particle size, pore size 4 nm
Sigma-Aldrich
Siliciumdioxid, nanopowder (spherical, porous), 5-20 nm particle size (TEM), 99.5% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Anatase, powder, −325 mesh, ≥99% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Rutil, nanopowder, <100 nm particle size, 99.5% trace metals basis
Sigma-Aldrich
LUDOX® TM-50 kolloidales Siliziumdioxid, 50 wt. % suspension in H2O
Sigma-Aldrich
Silicium(IV)-oxid, nanopowder, 99.8% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, Mischung aus Rutil und Anatas, nanopowder, <100 nm particle size (BET), 99.5% trace metals basis
Sigma-Aldrich
Siliziumdioxid, mesostrukturiert, MCM-41 type (hexagonal)
Sigma-Aldrich
Silicium(IV)-oxid
Sigma-Aldrich
LUDOX® SM kolloidales Siliziumdioxid, 30 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® AM kolloidales Siliziumdioxid, 30 wt. % suspension in H2O
Sigma-Aldrich
Titan(IV)-oxid, Mischung aus Rutil und Anatas, nanoparticles, <150 nm particle size (volume distribution, DLS), dispersion, 40 wt. % in H2O, 99.5% trace metals basis
Sigma-Aldrich
LUDOX® HS-30 kolloidales Siliziumdioxid, 30 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® TM-40 kolloidales Siliziumdioxid, 40 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® TMA kolloidales Siliziumdioxid, 34 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® AS-30 kolloidales Siliziumdioxid, 30 wt. % suspension in H2O
Sigma-Aldrich
Titan(IV)-oxid, Rutil, ≥99.98% trace metals basis
Sigma-Aldrich
LUDOX® LS kolloidales Siliziumdioxid, 30 wt. % suspension in H2O
Sigma-Aldrich
LUDOX® CL kolloidales Siliziumdioxid, 30 wt. % suspension in H2O
Sigma-Aldrich
Titan(IV)-oxid, Rutil, 99.995% trace metals basis
Sigma-Aldrich
Titan(IV)-oxid, contains 1% Mn as dopant, nanopowder, <100 nm particle size (BET), ≥97%