821874

TSKgel^® G5000PWXL-CP (10 µm) HPLC Columns

L x I.D. 30 cm × 7.8 mm, hydroxylated methacrylate phase

• Synonym(e): TSKgel^® Size Exclusion (PW-Type) HPLC Column
• UNSPSC-Code: 41115711
• eCl@ss: 32110501

Eigenschaften

• product name: TSKgel^® Größenausschluss (PW-Typ)-HPLC-Säule, phase hydroxylated methacrylate, L × I.D. 30 cm × 7.8 mm, 10 μm particle size
• Materialien: stainless steel hardware
• Agentur: suitable for USP L38; suitable for USP L39
• Produktlinie: TSKgel^®
• Hersteller/Markenname: Tosoh 21874
• Parameter: ≤0.5 M salt concentration; ≤20% organic solvent; 1 mL/min flow rate; 25 bar max. pressure; 60 °C temperature
• Methode(n): HPLC: suitable
• L × ID: 30 cm × 7.8 mm
• Matrix: polymer particle platform
• Aktive Matrixgruppe: hydroxylated methacrylate phase
• Partikelgröße: 10 μm
• Porengröße: 1000 Å pore diameter
• Betriebs-pH-Wert: 2-12
• Trenntechnik: size exclusion (SEC)

Beschreibung

Allgemeine Beschreibung

TTSKgel PW_XL-CP columns were specifically developed for the analysis of water-soluble cationic polymers. Composed of polymethacrylate beads, cationic groups are introduced on the surface of the TSKgel PW_XL-CP packing material to prevent adsorption of cationic polymers and allow elution under low salt conditions. These columns show high theoretical plate numbers, linear calibration curves and high durability because the base resin is the same as that used in the TSKgel PW_XL series columns. Three columns are available within the TSKgel PW_XL-CP series, each with a different particle size, separation range and exclusion limit, allowing polymers within a wide molecular mass range to be separated and characterized.

Anwendung

Exclusion limit (Da): 1,000,000
Separation range (Da) (PEO,PEG): 400~500,000

Physikalische Form

Shipped in water.

Empfohlene Produkte

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

Rechtliche Hinweise

TSKgel is a registered trademark of Tosoh Corporation