Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos

647705

Sigma-Aldrich

Silicon

wafer, <111>, P-type, contains boron as dopant, diam. × thickness 2 in. × 0.3 mm

Sinônimo(s):

Silicon element

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(1)

About This Item

Fórmula linear:
Si
Número CAS:
7440-21-3
Peso molecular:
28.09
Número MDL:
MFCD00085311
Código UNSPSC:
12352300
ID de substância PubChem:
24883420
NACRES:
NA.23

forma

crystalline (cubic (a = 5.4037))
wafer

contém

boron as dopant

diâmetro × espessura

2 in. × 0.3 mm

pb

2355 °C (lit.)

pf

1410 °C (lit.)

densidade

2.33 g/mL at 25 °C (lit.)

propriedades semicondutoras

<111>, P-type

cadeia de caracteres SMILES

[Si]

InChI

1S/Si

chave InChI

XUIMIQQOPSSXEZ-UHFFFAOYSA-N

Procurando produtos similares? Visita Guia de comparação de produtos

Categorias relacionadas

propriedades físicas

0 vortex defects. Etch pitch density (EPD) < 100 (cm-2). Resistivity 10-3 - 40 Ωcm
Oxygen content: <= 1~1.8 x 1018 /cm3; Carbon content: <= 5 x 1016 /cm3; Boule diameter: 1~8 ″

Código de classe de armazenamento

13 - Non Combustible Solids

Classe de risco de água (WGK)

WGK 2

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type N95 (US)

Certificados de análise (COA)

Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

Slide 1 of 2

1 of 2

Gold coated silicon wafer 99.999% (Au), layer thickness 1000&#160;Å, 99.99% (Ti)

Sigma-Aldrich

643262

Gold coated silicon wafer

Silicon pieces, 99.95% trace metals basis

Sigma-Aldrich

343250

Silicon

Chengyong Li et al.
Journal of nanoscience and nanotechnology, 13(3), 2272-2275 (2013-06-13)
Mesoporous Si-C-O fibers were fabricated by air activation of a kind of carbon-rich SiC-C fibers at 600 degrees C. The SiC-C fibers were prepared from the hybrid precursor of polycarbosilane and pitch through melt-spinning, air curing and pyrolysis in nitrogen.
Bo-Soon Kim et al.
Journal of nanoscience and nanotechnology, 13(5), 3622-3626 (2013-07-19)
A subwavelength structure (SWS) was formed via a simple chemical wet etching using a gold (Au) catalyst. Single nano-sized Au particles were fabricated by metallic self-aggregation. The deposition and thermal annealing of the thin metallic film were carried out. Thermal
Seungil Park et al.
Journal of nanoscience and nanotechnology, 13(5), 3397-3402 (2013-07-19)
We investigated the thin film growths of hydrogenated silicon by hot-wire chemical vapor deposition with different flow rates of SiH4 and H2 mixture ambient and fabricated thin film solar cells by implementing the intrinsic layers to SiC/Si heterojunction p-i-n structures.
Jaewoo Lee et al.
Journal of nanoscience and nanotechnology, 13(5), 3495-3499 (2013-07-19)
A spin-casting process for fabricating polycrystalline silicon sheets for use as solar cell wafers is proposed, and the parameters that control the sheet thickness are investigated. A numerical study of the fluidity of molten silicon indicates that the formation of
Youngin Jeon et al.
Journal of nanoscience and nanotechnology, 13(5), 3350-3353 (2013-07-19)
Si-nanowire (NW)-array-based NOT-logic circuits were constructed on plastic substrates. The Si-NW arrays were fabricated on a Si wafer through top-down methods, including conventional photolithography and crystallographic wet etching, and transferred onto the plastic substrates. Two field-effect transistors were fabricated on
Exibir todos os documentos relacionados

Artigos

Synthesis of Melting Gels Using Mono-Substituted and Di-Substituted Alkoxysiloxanes

Hybrid organic-inorganic sol-gel materials containing silica were first called “ORMOSILs” in 1984.

Protocolos

Negative Photoresist Procedure

Photoresist kit offers pre-weighed chemical components for lithographic processes, with separate etchants for various substrate choices.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica