Accéder au contenu
Merck
  • Analysis of remifentanil with liquid chromatography-tandem mass spectrometry and an extensive stability investigation in EDTA whole blood and acidified EDTA plasma.

Analysis of remifentanil with liquid chromatography-tandem mass spectrometry and an extensive stability investigation in EDTA whole blood and acidified EDTA plasma.

Anesthesia and analgesia (2015-02-19)
Remco A Koster, Hugo E M Vereecke, Ben Greijdanus, Daan J Touw, Michel M R F Struys, Jan Willem C Alffenaar
RÉSUMÉ

Remifentanil is a μ-opioid receptor agonist that was developed as a synthetic opioid for use in anesthesia and intensive care medicine. Remifentanil is rapidly metabolized in both blood and tissues, which results in a very short duration of action. Even after blood sampling, remifentanil is unstable in whole blood and plasma through endogenous esterases and chemical hydrolysis. The instability of remifentanil in these matrices makes sample collection and processing a critical phase in the bioanalysis of remifentanil. We have developed a fast and simple sample preparation method using protein precipitation followed by liquid chromatography-tandem mass spectrometry analysis. To improve the stability of remifentanil, citric acid, ascorbic acid, and formic acid were investigated for acidification of EDTA plasma. The stability of remifentanil was investigated in stock solution, EDTA whole blood, EDTA plasma, and acidified EDTA plasma at ambient temperature, 4 °C, 0 °C, and at -20 °C. The analytical method was fully validated based on the Food and Drug Administration guidelines for bioanalytical method validation with a large linear range of 0.20 to 250 ng/mL remifentanil in EDTA plasma acidified with formic acid. The stability results of remifentanil in EDTA tubes, containing whole blood placed in ice water, showed a decrease of approximately 2% in 2 hours. EDTA plasma acidified with citric acid, formic acid, and ascorbic acid showed 0.5%, 4.2%, and 7.2% remifentanil degradation, respectively, after 19 hours at ambient temperature. Formic acid was chosen because of its volatility and thus liquid chromatography-tandem mass spectrometry compatibility. The use of formic acid added to EDTA plasma improved the stability of remifentanil, which was stable for 2 days at ambient temperature, 14 days at 4 °C, and 103 days at -20 °C. The analytical method we developed uses a simple protein precipitation and maximal throughput by a 2-point calibration curve and short run times of 2.6 minutes. Best sample stability is obtained by placing tubes containing EDTA whole blood in ice water directly after sampling, followed by centrifugation and transfer of the EDTA plasma to tubes with formic acid. The stability of remifentanil in EDTA plasma was significantly improved by the addition of 1.5 μL formic acid per milliliter of EDTA plasma. This analytical method and sample pretreatment are suitable for remifentanil pharmacokinetic studies.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
L-acide ascorbique, BioXtra, ≥99.0%, crystalline
Sigma-Aldrich
L-acide ascorbique, powder, suitable for cell culture, γ-irradiated
Sigma-Aldrich
Formate d′ammonium, ≥99.995% trace metals basis
Sigma-Aldrich
L-acide ascorbique, suitable for cell culture, suitable for plant cell culture, ≥98%
Sigma-Aldrich
Acide éthylènediaminetétraacétique solution, 0.02% in DPBS (0.5 mM), sterile-filtered, BioReagent, suitable for cell culture
Sigma-Aldrich
L-acide ascorbique, reagent grade, crystalline
Sigma-Aldrich
Ammonium formate solution, BioUltra, 10 M in H2O
Sigma-Aldrich
L-acide ascorbique, 99%
Sigma-Aldrich
Ethylenediaminetetraacetic acid, ACS reagent, 99.4-100.6%, powder
Sigma-Aldrich
Ethylenediaminetetraacetic acid, anhydrous, crystalline, BioReagent, suitable for cell culture
Sigma-Aldrich
Ethylenediaminetetraacetic acid, 99.995% trace metals basis
Sigma-Aldrich
Acide citrique monohydrate, ACS reagent, ≥99.0%
Sigma-Aldrich
L-acide ascorbique, reagent grade
Sigma-Aldrich
L-acide ascorbique, ACS reagent, ≥99%
Sigma-Aldrich
L-acide ascorbique, meets USP testing specifications
Sigma-Aldrich
Ethylenediaminetetraacetic acid, anhydrous, BioUltra, ≥99% (titration)
Sigma-Aldrich
Acide formique, ≥95%, FCC, FG
Sigma-Aldrich
Acide citrique monohydrate, reagent grade, ≥98% (GC/titration)
Sigma-Aldrich
Ethylenediaminetetraacetic acid, purified grade, ≥98.5%, powder
Sigma-Aldrich
L-acide ascorbique, FCC, FG
Sigma-Aldrich
L-acide ascorbique, BioUltra, ≥99.5% (RT)
Sigma-Aldrich
Acide citrique monohydrate, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., buffer substance, 99.5-102%
Sigma-Aldrich
L-acide ascorbique, puriss. p.a., ACS reagent, reag. ISO, Ph. Eur., 99.7-100.5% (oxidimetric)
Sigma-Aldrich
Acide citrique monohydrate, puriss., meets analytical specification of Ph. Eur., BP, USP, E330, 99.5-100.5% (based on anhydrous substance), grit
Sigma-Aldrich
Méthanol, NMR reference standard
Sigma-Aldrich
L-acide ascorbique, puriss. p.a., ≥99.0% (RT)
Sigma-Aldrich
Acide citrique monohydrate, BioXtra, ≥99.5%
Sigma-Aldrich
Methanol solution, NMR reference standard, 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
Sigma-Aldrich
Methanol-12C, 99.95 atom % 12C
Sigma-Aldrich
Methanol solution, (Methanol:Dimethyl sulfoxide 1:1 (v/v))