TETP01300

Polycarbonat-Membranfilter, Porengröße 8,0 μm

Isopore^™, filter diam. 13 mm, hydrophilic

• Synonym(e): Isopore Membrane Filter
• UNSPSC-Code: 40161507
• eCl@ss: 32031602
• NACRES: NB.24

Eigenschaften

• Materialien: plain filter; polycarbonate membrane; white filter
• Sterilität: non-sterile
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Isopore^™; Millipore
• Parameter: 140 °C max. temp.; 250 mL/min-cm²-psi water flow rate (maximum flow rate per 1.0 psi); 60 L/min-cm²-psi air flow rate; ~875 mL/min-cm² water flow rate at 10 psi (typical results)
• Filterdurchm.: 13 mm
• Dicke: 18 μm
• Gravimetrisch bestimmte extrahierbare Substanzen: <1%
• Brechungsindex: n/D 1.6
• Matrix: Isopore^™
• Porengröße: 5-20 % porosity; 8.0 μm pore size
• Versandbedingung: ambient

Beschreibung

Allgemeine Beschreibung

Filter Code: TETP

Filter Type: Membranfilter

The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.

Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety

Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays

Anwendung

• Chemotaxis
• Bioassays
• Cytology
• Air monitoring
• Microplastics analysis

Vorsicht

Possible reduction in flow rates may occur after autoclaving.

Rechtliche Hinweise

ISOPORE is a trademark of Merck KGaA, Darmstadt, Germany