PCC300C30G

Pellicon^® Kapsel mit Ultracel^® Membran

C Screen, 3 m² manifold AseptiQuik^® G connectors

• Synonym(e): Pellicon^® Capsule with Ultracel^® Membrane
• UNSPSC-Code: 23151806

Eigenschaften

• Materialien: EPDM rubber seal; PPO/PS blend (core; core); PPO/PS blend housing; TPE seal; composite regenerated cellulose (CRC) membrane; epoxy adhesive; polyester screen; polypropylene seal; polyurethane adhesive
• Qualitätsniveau: 400
• Sterilität: sterile; γ-irradiated
• Produktlinie: Pellicon^®
• Leistungsmerkmale: holdup volume 1110 mL (in feed channel); holdup volume 1692 mL (in permeate channel)
• Verpackung: package of 1
• Parameter: max. inlet pressure at 60 psi (4.1 bar) and 4-30 °C; max. transmembrane pressure at 45 psi (3.1 bar) and 4-30 °C; 4-6 L/min-m² flow rate
• Methode(n): ultrafiltration: suitable
• Filtrationsfläche: 3 m²
• Vesikelgröße: , Type C screen (coarse screen)
• Größe: 40.4 cm (15.9 in.) , Length; 44.2 cm (17.4 in.) , Height
• Breite: 45.4 cm (17.9 in.) ; 454 mm
• Verunreinigungen: ≤5 ppm Meets TOC (in retentate effluent, after a WFI flush of 20 L/m²)
• Matrix: Ultracel^®
• Porengröße: 300 kDa
• pH-Bereich: 2-13
• Lagertemp.: 15-25°C

Beschreibung

Allgemeine Beschreibung

The Pellicon^® Capsule is the first of its kind -- a true single-use TFF device that comes ready to process in minutes. Self-contained, it employs an easy-to-use, holderless format and is supplied sterilized by irradiation.

Feed: AseptiQuik^® G Connector

Permeate: AseptiQuik^® G Connector

Retentate: AseptiQuik^® G Connector
Permeate: AseptiQuik^® G Connector

Anwendung

Viral Gene Therapies, Vaccines, Concentration, Diafiltration, Buffer exchange, Protein purification, mRNA

Leistungsmerkmale und Vorteile

• Plug ′n play, holderless design - easy to install, safe to remove
• Gamma Sterilized and preseravtive-free - ready to process in minutes
• True single-use, self-contained capusle - fast, safe, and flexible batch turnaround
• Proven Ultracel^® membrane and C screen - high recovery, superior mass transfer, solvent resistance
• Pellicon^® TFF proven performance - true linear scalability within Pellicon^® TFF families

Verpackung

The manifold assembly is inserted into a polyethylene foam frame and then double bagged and vacuum sealed. The double-bagged assembly is placed within a second foam frame and individually boxed (qty 1 per box). Packaged assemblies are palletized.

Sonstige Hinweise

The Emprove^® Program complements the product portfolio through

• Comprehensive documentation to support qualification, risk assessment and process optimization needs.
• Consolidation of product specific testing, quality and regulatory information to simplify compliance requirements.
• Convenient 24/7 access to up-to-date product information.

Rechtliche Hinweise

AseptiQuik is a registered trademark of Colder Products Company

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany