This product was designed for the original D class DMP cartridge. For use in the Samba Cartridge, the Jetting temperature needs to be increased to 32 °C.
Fortfahren mit
901971
SunTronic® silver nanoparticle ink for inkjet printing
sintering temperature: 150-250 °C
Synonym(e):
Ag ink, Conductive ink, Silver ink, SunTronic®EMD5730
Anmelden zur Ansicht der Organisations- und Vertragspreise.
Größe auswählen
Ansicht ändern
| Größe/SKU | Verfügbarkeit | Preis |
|---|---|---|
2 mL | Warenkorb auf Verfügbarkeit prüfen | € 232,00 |
10 mL | Warenkorb auf Verfügbarkeit prüfen | € 574,00 |
Über diesen Artikel
Empirische Formel (Hill-System):
Ag
Molekulargewicht:
107.87
NACRES:
NA.23
UNSPSC Code:
12352103
Technischer Dienst
Benötigen Sie Hilfe? Unser Team von erfahrenen Wissenschaftlern ist für Sie da.
Unterstützung erhaltendescription
Electrodes, Sintering temperature: 150-250 °C for 10 – 60 min, Solid content: 40%, Volume Resistivity: 5 – 30 uΩ.cm
form
liquid
surface tension
28-31 dyn/cm
viscosity
11-13 cP (Brookfield)
storage temp.
2-8°C
General description
SunTronic EMD5730 is formulated for inkjet printing of conductive traces onto a variety of substrates. EMD5730 is a solvent-based silver nanoparticle ink which demonstrates superior conductivity, stable jetting performance and adhesion to ITO coated glass.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.
Application
SunTronic® silver nanoparticle ink for inkjet printing (SunTronic® EMD5730) is a 3D additive printing technology that is used in a variety of applications such as flexible microsystems, and electronics. It is printed on a liquid crystal polymeric substrate for the formation of a low cost, adaptable tooling for effective deposition of a wide range of materials.
Legal Information
SunTronic is a registered trademark of Sun Chemical, Inc.
Disclaimer
Printing
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
Sintering:
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Storage at a cool room temperature 10-15°C is recommended. Refrigeration can be used but agitated to assure proper dispersion is recommended.
1 of 1
Dieser Artikel | |||
|---|---|---|---|
| description sintering temperature: 150-250 °C | description - | description - | description 50 wt. %, dispersion in tripropylene glycol mono methyl ether |
| form liquid | form liquid | form liquid | form liquid |
| storage temp. 2-8°C | storage temp. 2-8°C | storage temp. 2-8°C | storage temp. - |
| viscosity 11-13 cP (Brookfield) | viscosity 45-55 Pa.s | viscosity 13 mPa.s±3 mPa.s(20 °C) | viscosity 24 cP |
| description Solid content: 40%, Electrodes, Volume Resistivity: 5 – 30 uΩ.cm, Sintering temperature: 150-250 °C for 10 – 60 min | description Electrodes, Sheet resistivity: <0.010 Ω/sq/mil (150°C/10 min), Solid content: 82-85% (120 °C), Volume resistivity: <2.5x10-5 Ω.cm (150°C/30 min) | description Electrodes | description Electrodes |
| surface tension 28-31 dyn/cm | surface tension - | surface tension 29 mN/m±3 mN/m | surface tension 24 dyn/cm |
Signalwort
Danger
Gefahrencodes
Lagerklasse
3 - Flammable liquids
Flammpunkt (°F)
71.6 °F
Flammpunkt (°C)
22 °C
Sicherheitshinweise
Hazard Classifications
Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Flam. Liq. 2 - Repr. 2 - STOT RE 2 - STOT RE 2 Oral
Zielorgane
Kidney, Nervous system
Zulassungslistungen
Zulassungslistungen werden hauptsächlich für chemische Produkte erstellt. Für nicht-chemische Produkte können hier nur begrenzte Angaben gemacht werden. Kein Eintrag bedeutet, dass keine der Komponenten gelistet ist. Es liegt in der Verantwortung des Benutzers, die sichere und legale Verwendung des Produkts zu gewährleisten.
141-78-6 + 67-63-0 + 64-17-5
CAS No.
Hier finden Sie alle aktuellen Versionen:
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
-
vale para los cartuchos Dimatix® Materials Cartridge - Samba® Cartridge?
1 answer-
Helpful?
-
-
I was wondering the Fromm value (Z) for your ink was as well as average particle size.
1 answer-
The Fromm value and particle size are not determined for this product.
Helpful?
-