Direkt zum Inhalt
Merck
Alle Fotos(2)

Dokumente

547999

Sigma-Aldrich

Polyethylen

High density, melt index 2.2 g/10 min (190 °C/2.16kg)

Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Alle Fotos(2)

About This Item

Lineare Formel:
H(CH2CH2)nH
CAS-Nummer:
9002-88-4
MDL-Nummer:
MFCD00084423
UNSPSC-Code:
12162002
PubChem Substanz-ID:
24879001
NACRES:
NA.25

Form

pellets

Schmelzindex

2.2 g/10 min (190 °C/2.16kg)

Härte

65 (Shore D, ASTM D 2240)

Übergangstemp.

softening point 123 °C (Vicat, ASTM D 1525)

Dichte

(high density)

InChI

1S/C2H4/c1-2/h1-2H2

InChIKey

VGGSQFUCUMXWEO-UHFFFAOYSA-N

Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich

Verwandte Kategorien

Anwendung

Typical applications included specialty injection molded parts.

Leistungsmerkmale und Vorteile

Excellent low temperature impact strength and environmental stress-crack resistance.

Lagerklassenschlüssel

11 - Combustible Solids

WGK

WGK 3

Flammpunkt (°F)

Not applicable

Flammpunkt (°C)

Not applicable

Persönliche Schutzausrüstung

Eyeshields, Gloves, type N95 (US)

Analysenzertifikate (COA)

Suchen Sie nach Analysenzertifikate (COA), indem Sie die Lot-/Chargennummer des Produkts eingeben. Lot- und Chargennummern sind auf dem Produktetikett hinter den Wörtern ‘Lot’ oder ‘Batch’ (Lot oder Charge) zu finden.

Besitzen Sie dieses Produkt bereits?

In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.

Die Dokumentenbibliothek aufrufen

Kunden haben sich ebenfalls angesehen

Slide 1 of 3

1 of 3

Polyethylene - High Density (HDPE), film, thickness 0.01 mm, size 100 × 100 mm

GF65138182

Polyethylene - High Density

Polyethylen analytical standard, for GPC, 2,000

Supelco

81223

Polyethylen

Polyethylene - High Density (HDPE), granule, 5 mm nominal granule size, weight 2 kg

GF77863517

Polyethylene - High Density

Nina Bloecher et al.
Biofouling, 29(3), 237-246 (2013-02-27)
The hydroid Ectopleura larynx is one of the main fouling organisms on salmon aquaculture cages in Norway; this study investigated novel surface materials and microtopographies to deter its settlement. The settlement preferences of hydroid larvae for 12 materials with wettabilities
Thibault Honegger et al.
Lab on a chip, 13(8), 1538-1545 (2013-02-23)
In this paper, we introduce a dielectrophoresis (DEP)-based handling method that allows fine 3D manipulation of beads in suspension using a lab on a chip device. The device consists of two layers of linear electrodes on the top and bottom
Ryan M Baxter et al.
Journal of biomedical materials research. Part B, Applied biomaterials, 101(3), 467-475 (2013-02-26)
Despite the widespread implementation of highly cross-linked polyethylene (HXLPE) liners to reduce the clinical incidence of osteolysis, it is not known if the improved wear resistance will outweigh the inflammatory potential of HXLPE wear debris generated in vivo. Thus, we
Eliandra Mirlei Rossi et al.
Journal of infection in developing countries, 7(3), 229-234 (2013-03-16)
Contaminated sponges might lead to cross-contamination in kitchens since they can transfer microorganisms to surfaces where microorganisms can survive for hours or days and contaminate food. The main objective of this study was to evaluate the transfer and the survival
Morteza Meftah et al.
The Journal of bone and joint surgery. American volume, 95(13), 1193-1197 (2013-07-05)
Ceramic femoral heads produce less wear of the opposing polyethylene than do metal femoral heads in wear simulation studies. This is a matched-pair analysis of the wear of ceramic and metal femoral heads on conventional polyethylene in uncemented total hip
Alle zugehörigen Dokumente anzeigen

Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..

Setzen Sie sich mit dem technischen Dienst in Verbindung.