No regeneration method is available for this product.
推薦產品
容積
750 cc
接頭
1/4 in. fitting
尋找類似的產品？ 前往 產品比較指南
一般說明
当进入气体中的级别不超过 10 ppm 时，除氧催化剂可将氧降低至 2 ppb 以下。因为催化剂是涂在分子筛上的，所以这个捕集阱也可以除去水蒸气。
尺寸：
尺寸：
- 120 cc Trap：11 1/8 in.(28.2 cm) 长 x 1 3/8 in. (35 mm) 直径
- 750 cc Trap：16 1/2 in.(41.9 cm) 长 x 2 5/16 in. (59 mm) 直径
- S-Trap：7 1/2 in. (19 cm) 长 x 5 9/16 in. (14.1 cm) 宽 x 1/2 in. (13 mm) 直径 [ 总床长 = 19 3/4 in.(50.2 cm)；延长的床长度确保气体和吸附剂之间的长期联系，并提供更大的工作能力 ]
應用
Supelpure-O Oxygen/Moisture Trap along with Molecular Sieve 5A Moisture Trap was used as the two cascade columns required for the purification of ethylene, in an experimental study based on using micrometer-sized aggregates of polystyrene nanoparticles as fragmentable support for Ziegler-Natta catalysts.[1]
法律資訊
訊號詞
Danger
危險分類
Aquatic Acute 1 - Aquatic Chronic 1 - Carc. 1A Inhalation - Resp. Sens. 1 - Skin Sens. 1 - STOT RE 2 Inhalation
標靶器官
Lungs
儲存類別代碼
6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
水污染物質分類（WGK）
WGK 3
閃點（°F）
Not applicable
閃點（°C）
Not applicable
客戶也查看了
Organic nanoparticles as fragmentable support for Ziegler-Natta catalysts.
Nietzel S
Journal of Polymer Science Part A: Polymer Chemistry, 53 (1), 15-22 (2015)
-
Is it possible to regenerate a spent trap through heat treatment of other method?
1 answer-
Helpful?
-
-
What is the pressure rating of the Supelpure _ O oxuygen/moisture trap, and what is the H2O/O2 capacities? Can it be used with H2?
1 answer-
The maximum pressure recommended for this product is 250 psi (17.2 bar). The removal capacities are 10.2 grams of water and 2.4 grams of oxygen. This trap is suitable for use with hydrogen.
Helpful?
-
-
Does the "CC" designation relate to the volume of gas that the purifier can scrub at a time, or does it indicate the longevity of the purifier? Additionally, does it affect the flow rate? What pressure should a nitrogen regulator be set to in order to use this product?
1 answer-
The "cc" designation refers to the volume of adsorbent material in each of the two products, Supelpure-O 120CC and Supelpure-O 750cc. The lifetime of the Supelpure-O, and/or any gas purification trap, relies on the contaminants and their concentration level in the incoming gas, as well as the flow rate. Bulletin 918 on gas purification includes a table of the maximum flow rate and pressure of various gas purification products, some of which are no longer available.
The pressure setting on the incoming carrier gas tank depends on the type of analysis being performed, whether packed or capillary, isothermal or temperature programmed method, etc. For GC applications, a pressure at least 20psi higher than that achieved during the analysis is recommended, preferably 40-50psi higher. In GCs that do not maintain constant pressure, as the temperature increases, resistance and back pressure rise, causing the flow rate to drop.Helpful?
-
Active Filters
我們的科學家團隊在所有研究領域都有豐富的經驗，包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務
