跳轉至內容
Merck
全部照片(7)

重要文件

T6399

Sigma-Aldrich

三氯乙酸

ACS reagent, ≥99.0%

同義詞:

TCA

登入查看組織和合約定價


About This Item

線性公式:
Cl3CCOOH
CAS號碼:
分子量::
163.39
Beilstein:
970119
EC號碼:
MDL號碼:
分類程式碼代碼:
12352100
PubChem物質ID:
NACRES:
NA.21
暫時無法取得訂價和供貨情況

等級

ACS reagent

品質等級

蒸汽密度

<1 (vs air)

蒸汽壓力

1 mmHg ( 51 °C)

化驗

≥99.0%

雜質

Substances darkened by sulfuric acid, passes test
≤0.01% insoluble matter

燃燒殘留物

≤0.03%

折射率

n20/D 1.62 (lit.)

bp

196 °C (lit.)

mp

54-58 °C (lit.)

溶解度

H2O: 1 g/10 mL

密度

1.62 g/mL at 25 °C (lit.)

負離子痕跡

chloride (Cl-): ≤0.002%
nitrate (NO3-): ≤0.002%
phosphate (PO43-): ≤5 ppm
sulfate (SO42-): ≤0.02%

正離子痕跡

Fe: ≤0.001%
heavy metals (as Pb): ≤0.002%

官能基

carboxylic acid
chloro

儲存溫度

2-8°C

SMILES 字串

OC(=O)C(Cl)(Cl)Cl

InChI

1S/C2HCl3O2/c3-2(4,5)1(6)7/h(H,6,7)

InChI 密鑰

YNJBWRMUSHSURL-UHFFFAOYSA-N

尋找類似的產品? 前往 產品比較指南

相關類別

應用

  • 三氯乙酸已用于从血浆中分离的sLRP(可溶性循环低密度脂蛋白受体相关蛋白-1)的沉淀。[1]
  • 它已用于从植物样本中提取抗坏血酸。它还用于制备用于抗坏血酸测定的抗坏血酸标准品。[2]
  • 它已用于IMAC(固相金属离子亲和色谱)分离的磷蛋白沉淀。[3]
传统上用于沉淀蛋白质。用于通过定量沉淀测定蛋白质浓度。用作脱钙剂和显微镜样品的固定剂。

相關產品

產品號碼
描述
訂價

象形圖

CorrosionEnvironment

訊號詞

Danger

危險聲明

危險分類

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Dam. 1 - Skin Corr. 1A

儲存類別代碼

8B - Non-combustible corrosive hazardous materials

水污染物質分類(WGK)

WGK 2

閃點(°F)

Not applicable

閃點(°C)

Not applicable

個人防護裝備

Eyeshields, Faceshields, Gloves, type P3 (EN 143) respirator cartridges


從最近期的版本中選擇一個:

分析證明 (COA)

Lot/Batch Number

未看到正確版本?

如果您需要一個特定的版本,您可以透過批號來尋找特定憑證。

已經擁有該產品?

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

Casein Kinase 2 (CK2)-mediated Phosphorylation of Hsp90? as a Novel Mechanism of Rifampin-induced MDR1 Expression.
Kim SW et al.
The Journal of Biological Chemistry, 290, 17029-17029 (2015)
Measurement of reduced, oxidized and total ascorbate content in plants.
Gillespie KM and Ainsworth EA
Nature Protocols, 2, 871-871 (2007)
Impaired lipoprotein receptor-mediated peripheral binding of plasma amyloid-? is an early biomarker for mild cognitive impairment preceding Alzheimer's disease.
Sagare AP et al.
Journal of Alzheimer'S Disease, 24, 25-25 (2011)
Philip D Campbell et al.
The Journal of neuroscience : the official journal of the Society for Neuroscience, 34(44), 14717-14732 (2014-10-31)
Mutations in Kinesin proteins (Kifs) are linked to various neurological diseases, but the specific and redundant functions of the vertebrate Kifs are incompletely understood. For example, Kif5A, but not other Kinesin-1 heavy-chain family members, is implicated in Charcot-Marie-Tooth disease (CMT)
Seokjo Kang et al.
Journal of Alzheimer's disease : JAD, 70(3), 667-680 (2019-07-01)
Increased levels of total tau (t-tau) and hyperphosphorylated tau (p-tau) proteins in the cerebrospinal fluid of Alzheimer's disease (AD) patients are well documented and strongly correlate with AD pathology. Recent studies have further shown that human tau can be released

Questions

1–4 of 4 Questions  
  1. The answer stated 7 month ago says that "A 100% (w/v) solution of TCA can be made by the addition of 227 ml of water to 500 g of TCA." The powder purity being 99%, why wouldn't it be 100g of TCA for 100 mL of water for a 100% w/v solution?

    1 answer
    1. The formula "A 100% (w/v) solution of TCA can be made by the addition of 227 mL of water to 500 g of TCA" is sourced from Molecular Cloning: A Laboratory Manual, 3rd ed., Sambrook, J. F., et al., Cold Spring Harbor Laboratory Press (Cold Spring Harbor, NY: 2001), p. A1.29.
      Solutions should be prepared accurately at any given temperature by weighing into a volumetric flask, dissolving, and then bringing to the specified volume. The Molecular Cloning application may not have required an accurate solution. Volumes prepared using graduated cylinders are less accurate than those prepared using a To Contain class A volumetric flask, even if densities have been established. Unless specifically following the Molecular Cloning paper, it is best to prepare the solution using the established and correct method.

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer
    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. How can I determine the shelf life / expiration / retest date of this product?

    1 answer
    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  4. What are the recommended solubility and storage conditions for the trichloroacetic acid (TCA) product with CAS number 76-03-9?

    1 answer
    1. A 100% (w/v) solution of TCA can be made by the addition of 227 ml of water to 500 g of TCA. The resulting clear solution will have a density of approximately 1.45 g/ml. Do not use plastic dishes and containers. Solution storage temperature 2-8 °C

      Helpful?

Reviews

No rating value

Active Filters

我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務