Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
推薦產品
產品名稱
氨溶液28-30%, for analysis EMSURE® ACS,Reag. Ph Eur
等級
ACS reagent
品質等級
agency
reag. Ph. Eur.
蒸汽壓力
635 hPa ( 20 °C)
產品線
EMSURE®
形狀
liquid
expl. lim.
27 %
濃度
28.0-30.0% NH4OH
雜質
≤0.020 ppm Ag (Silver)
≤0.020 ppm Ga (Gallium)
≤0.020 ppm In (Indium)
≤0.020 ppm Li (Lithium)
≤0.050 ppm Ba (Barium)
≤0.050 ppm Cd (Cadmium)
≤0.050 ppm Co (Cobalt)
≤0.050 ppm Cr (Chromium)
≤0.050 ppm Mn (Manganese)
≤0.050 ppm Mo (Molybdenum)
≤0.050 ppm Ni (Nickel)
≤0.050 ppm Pb (Lead)
≤0.050 ppm Tl (Thallium)
≤0.100 ppm Au (Gold)
≤0.100 ppm Bi (Bismuth)
≤0.100 ppm Cu (Copper)
≤0.100 ppm Fe (Iron)
≤0.100 ppm Mg (Magnesium)
≤0.100 ppm Pt (Platinum)
≤0.100 ppm Sn (Tin)
≤0.100 ppm Sr (Strontium)
≤0.100 ppm Ti (Titanium)
≤0.100 ppm Zn (Zinc)
≤0.2 ppm Sulphide (S)
≤0.3 ppm Chloride (Cl)
≤0.5 ppm Heavy metals (as Pb)
≤0.5 ppm Phosphate (PO4)
≤0.500 ppm Al (Aluminium)
≤0.500 ppm As (Arsenic)
≤0.500 ppm Ca (Calcium)
≤0.500 ppm K (Potassium)
≤0.500 ppm Na (Sodium)
≤10 ppm Carbonate (as CO2)
≤10 ppm Non volatile matter
≤2 ppm Nitrate (NO3)
≤2 ppm Pyridine and related substances
≤2 ppm Sulphate (SO4)
≤5 ppm Silicate (as SiO2)
≤5 ppm Substances reducing potassium permanganate
SMILES 字串
[NH4+].[OH-]
燃燒殘留物
≤10 ppm
pH值
>12 (20 °C in H2O, strongly alkaline)
bp
32 °C
mp
-72 °C
密度
0.9 g/mL at 25 °C (lit.)
0.892-0.910 (relative density (d 20/20))
儲存溫度
2-30°C
InChI
1S/H3N.H2O/h1H3;1H2
InChI 密鑰
VHUUQVKOLVNVRT-UHFFFAOYSA-N
尋找類似的產品? 前往 產品比較指南
包裝
请注意以下替换信息:
1054231000(1 L玻璃瓶)替换为1054231011(1 L HDPE瓶)
1054232500(2.5 L玻璃瓶)替换为1054232511(2.5 L HDPE瓶)
有关我们符合人体工程学且不易碎的HDPE瓶的更多信息,请访问:www.SigmaAldrich.com/hdpe-bottle
分析報告
验证:通过测试
外观:通过测试
溶液外观:通过测试
相对密度(d 20/20):0.892-0.910
碳酸盐(CO₂形式): ≤ 10 ppm
氯化物(Cl): ≤ 0.3 ppm
硝酸盐(NO₃): ≤ 2 ppm
磷酸盐(PO₄): ≤ 0.5 ppm
重金属(以 Pb 计): ≤ 0.5 ppm
硅酸盐(SiO₂形式): ≤ 5 ppm
硫酸盐(SO₄): ≤ 2 ppm
硫化物(S): ≤ 0.2 ppm
Ag(银): ≤ 0.020 ppm
Al(铝): ≤ 0.500 ppm
As(砷): ≤ 0.500 ppm
Au(金): ≤ 0.100 ppm
Ba(钡): ≤ 0.050 ppm
Bi(铋): ≤ 0.100 ppm
Ca(钙): ≤ 0.500 ppm
Cd(镉): ≤ 0.050 ppm
Co(钴): ≤ 0.050 ppm
Cr(铬): ≤ 0.050 ppm
Cu(铜): ≤ 0.100 ppm
Fe(铁): ≤ 0.100 ppm
Ga(镓): ≤ 0.020 ppm
In(铟): ≤ 0.020 ppm
K(钾): ≤ 0.500 ppm
Li(锂): ≤ 0.020 ppm
Mg(镁): ≤ 0.100 ppm
Mn(锰): ≤ 0.050 ppm
Mo(钼): ≤ 0.050 ppm
Na(钠): ≤ 0.500 ppm
Ni(镍): ≤ 0.050 ppm
Pb(铅): ≤ 0.050 ppm
Pt(铂): ≤ 0.100 ppm
Sn(锡): ≤ 0.100 ppm
Sr(锶): ≤ 0.100 ppm
Ti(钛): ≤ 0.100 ppm
Tl(铊): ≤ 0.050 ppm
Zn(锌): ≤ 0.100 ppm
吡啶及相关物质: ≤ 2 ppm
可还原高锰酸盐物质(ACS):通过测试
可还原高锰酸钾物质: ≤ 5 ppm
炽灼残渣: ≤ 10 ppm
非挥发性物质: ≤ 10 ppm
法律資訊
未找到適合的產品?
試用我們的產品選擇工具.
訊號詞
Danger
危險分類
Aquatic Acute 1 - Aquatic Chronic 2 - Eye Dam. 1 - Skin Corr. 1 - STOT SE 3
標靶器官
Respiratory system
儲存類別代碼
8B - Non-combustible, corrosive hazardous materials
水污染物質分類(WGK)
WGK 2
閃點(°F)
Not applicable
閃點(°C)
Not applicable
分析證明 (COA)
輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。
客戶也查看了
文章
This study is aimed at developing and validating an LC-ESI-ion trap-MS/MS method for identification and quantification of ethyl glucuronide (EtG) and ethyl sulfate (EtS) as ethanol biomarkers for urine analysis.
相關內容
Our ergonomic 1 L HDPE bottle for acids, bases, and solvents provide an alternative to glass chemical bottles for lab safety in pouring & handling of hazardous chemicals in the laboratory.
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
-
WHAT WOULD BE THE MOLARITY OF A 28-30 % NH3 SOLUTION OF AMMONIUM HYDROXIDE?
1 answer-
Molarity (moles/L) = Density (g/L) ÷ Molecular Weight (g/mol) * purity
= 900g/L ÷ 35.05g/mol * 0.291
= 7.47g/mol = 7.47MHelpful?
-
-
what will be the specific gravity of Liquor Ammonia at 40 degree celcius
1 answer-
The specific gravity at 40°C has not been determined for this product. The density of 0.9 g/mL provided in the product properties section has been measured at 25°C.
Helpful?
-
Active Filters
我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.
聯絡技術服務