跳转至内容
Merck

MFGL04GF3

Millipore

Durapore® 0.22 µm, Millipak® Final Fill灌装囊式过滤器

non-sterile (non-sterilized), Millipak® Final Fill 40, pore size 0.22 μm

别名:

Millipak® Final Fill 40

登录查看公司和协议定价


About This Item

分類程式碼代碼:
23151806

材料

PVDF membrane
polysulfone device
polysulfone support

品質等級

agency

certified by the ISO 9001:2015 (Quality Management Systems)
meets requirements for EP 2.6.14
meets requirements for JP 4.01
meets requirements for USP 85

無菌

irradiated
non-sterile (non-sterilized)

滅菌相容性

gamma compatible

產品線

Millipak® Final Fill 40

特點

hydrophilic

包裝

bag of 3 × double easy-open bag

參數

1.0 L/min flow rate at 0.69 bar
10 psi max. differential pressure (0.7 bar) at 25 °C (Reverse)
25 psi max. differential pressure (1.7 bar) at 25 °C (Forward)
50 psi max. differential pressure (3.5 bar) at 25 °C (Forward)
60 psi max. differential pressure (4.1 bar) at 25 °C (Forward)
60 psi max. inlet pressure (4.1 bar) at 25 °C
80 psi max. differential pressure (5.5 bar) at 25 °C (Forward)
80 psi max. inlet pressure (5.5 bar) at 25 °C

技術

sterile filtration: suitable

長度

3.4 in.

寬度

3.0 in.

過濾面積

200 cm2

雜質

<0.25 EU/mL bacterial endotoxins (LAL test)

基質

Durapore®

孔徑

0.22 μm pore size

起泡點

≥50 psi (3450 mbar), air with water at 23 °C

接頭

3/4 in. inlet connection
19 mm (3/4 in.) inlet/outlet connection (sanitary flange)
(19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)

一般說明

Device Configuration: Capsule

包裝

Double Easy-Open bag

準備報告

Sterilization Method
Device integrity and retention was maintained after 3 autoclave cycles of 90 minutes at 126 <nbsp/>°C. Devices can withstand a dose ? 40<nbsp/> kGy gamma exposure.
This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b)(6), validated based on large volume parenteral specifications as detailed in USP <788> Particulate Matter in Injections.

分析報告

Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta ATCC® 19146 per AST F838 methodology.

其他說明

Effluent meets the acceptance criteria set forth in USP <788> for large volume parenterals.

法律資訊

ATCC is a registered trademark of American Type Culture Collection
Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

未找到合适的产品?  

试试我们的产品选型工具.


分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ (Lot或Batch)字后找到。

已有该产品?

在文件库中查找您最近购买产品的文档。

访问文档库

相关内容

This page summarizes key considerations related to regulatory expectations for biomanufacturing including chemicals and polymeric materials. For chemicals, topics include nitrosamines and elemental impurities, and for polymeric materials such as filters and single-use assemblies, the focus is qualification and extractable and leachable testing.

This page summarizes key considerations related to regulatory expectations for biomanufacturing including chemicals and polymeric materials. For chemicals, topics include nitrosamines and elemental impurities, and for polymeric materials such as filters and single-use assemblies, the focus is qualification and extractable and leachable testing.

This page summarizes key considerations related to regulatory expectations for biomanufacturing including chemicals and polymeric materials. For chemicals, topics include nitrosamines and elemental impurities, and for polymeric materials such as filters and single-use assemblies, the focus is qualification and extractable and leachable testing.

This page summarizes key considerations related to regulatory expectations for biomanufacturing including chemicals and polymeric materials. For chemicals, topics include nitrosamines and elemental impurities, and for polymeric materials such as filters and single-use assemblies, the focus is qualification and extractable and leachable testing.

我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门