Model SS-2 is a lightweight benchtop unit with cylindrical steel housings (3 3/4 × 3 1/2 in.), gray epoxy finish, polyurethane feet, pilot lamp, 3-wire receptacle (U.S. plug) on a 12 in. cord, and a 4 ft, 3-wire power cord with U.S. plug.
Used to control THERMOWELL heating mantles or other resistive heating circuits (hot plates, heat tapes, water baths, etc). Available in solid-state or proportional on/off models. All models are fused (without circuit breakers). Calibrated in terms of percent power level from 5 to 90% (i.e. when knob is set at 50% power level, 83 volts are delivered if the line voltage is 117). Offers a wider range of control than proportional on/off type. In addition to resistive heating circuits, may be used to control incandescent lamps, room fans, stirring motors. 60 Hz.
법적 정보
POWERMITE is a trademark of Laboratory Craftsmen, Inc.
가장 최신 버전 중 하나를 선택하세요:
시험 성적서(COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our 문서 section.
