SLCR033

Millex^® hydrophilic PTFE syringe filter

pore size 0.45 μm, diam. 33 mm, non-sterile

• 別名: 0.45 μm PTFE syringe filter, Millex-LCR syringe filter, disposable syringe filter, syringe filter
• UNSPSCコード: 41104922
• eCl@ss: 32031690
• NACRES: NB.24

特性

• 物質: PTFE membrane; polypropylene housing
• 無菌性: non-sterile
• 製品種目: Millex^®
• 特徴: holdup volume≤ 80 μL (after air purge); hydrophilic
• メーカー／製品名: Millex^®
• パラメーター: 45 °C max. temp.; 8.6 bar max. inlet pressure (125 psi)
• テクニック: HPLC: suitable; UV/Vis spectroscopy: suitable; analytical sample preparation: suitable
• H: 27 mm
• 直径: 33 mm
• ろ過面積: 4.5 cm²
• 容量: 100 mL
• 色: light blue
• ポアサイズ: 0.45 μm
• 入力: sample type aqueous solution(s); sample type organic solution(s)
• 泡立ち点: ≥1.6 bar, air with water at 23 °C
• フィッティング: female Luer-Lok^® inlet; male Luer outlet slip

詳細

詳細

Filter Code: LCR
HPLC is certified for low levels of UV-absorbing extractable
SLCR033NS replaces SLCR025NS
SLCR033NB replaces SLCR025NB
SLCR033NK replaces SLCR025NK

MILLEX^® LCR Syringe Filter is a nonsterile, HPLC-certified syringe filter that contains an 0.20µm hydrophilic PTFE (polytetrafluoroethylene) membrane. This syringe filter is recommended for filtering 10-100 milliliter (mL) volumes to remove particles prior to instrumentation analysis. The single-use disposable filter removes particles larger than the membrane′s rated pore size.

特徴および利点

• HPLC-certified for low levels of UV-absorbing extractables
• Hydrophilic PTFE membranes exhibit low analyte binding and broad solvent compatibility, enabling the filtration of aqueous and organic solvents
• Polypropylene housing material provides low levels of extractable and broad chemical compatibility
• Recommended sample volume: 10-100mL
• Light blue band for easy identification

規格

For general laboratory use only

法的情報

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

Millex is a registered trademark of Merck KGaA, Darmstadt, Germany