D00572S01

Clarigard^® Cartridge Filter

pore size 0.5 μm, cartridge nominal length 20 in. (50 cm), filter diam. 2.75 in. (7 cm), Code 7

• Codice UNSPSC: 23151806

Proprietà

• Materiali: polypropylene filter; silicone seal
• Livello qualitativo: 400
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Clarigard^®
• Parametri: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• Lunghezza nominale della cartuccia: 20 in. (50 cm)
• Diam. filtro: 2.75 in. (7 cm)
• Impurezze: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction)
• Dimensione pori: 0.5 μm pore size
• Codice cartuccia: Code 7

Descrizione

Descrizione generale

Cartridge Type: Liquid

Clarigard^® filters′ 99.99% retention rating characteristic makes them ideal for the protection of critical downstream process steps such as membrane filters or chromatography columns. The graded-density depth structure of Clarigard^® filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractables levels and broad chemical compatibility.

Device Configuration: Cartridge

Nota sulla preparazione

Sterilization Method:
10 autoclave cycles or SIP at 126°C for 30min

Risultati analitici

Gravimetric Extractables: ≤ 20mg after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6L

Altre note

Directions for Use:

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the Polygard^® and Clarigard^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

Note legali

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany