Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
901083
Silver nanoparticles ink for inkjet printing
Sinonimo/i:
Ag ink, Conductive ink, Smart Jet C47NJET01020 conductive ink
Scegli un formato
Scegli un formato
About This Item
Prodotti consigliati
Stato
liquid
Livello qualitativo
Colore
dark brown to blue
Tensione superficiale
29 mN/m±3 mN/m
Viscosità
13 mPa.s±3 mPa.s(20 °C)
Capacità
20±1 % loading (Nanoparticles loading)
Temperatura di conservazione
2-8°C
Descrizione generale
Smart′Ink S-CS01120 conductive ink shows improved jetting performance and is successfully used on different tools such as Drop on Demand (DOD) inkjet printer FUJIFILM Dimatix, or such as digital micro-dispensing inkjet printer Microdrop and Microfab.
Caratteristiche e vantaggi
- Very high electrical conductivity.
- Low curing temperature for printing on flexible substrates.
- Non CMR ink.
- Compatible with various curing process including photonic, IR, low vacuum oven and thermal.
- Unchanged conductivity on bending.
- Good adhesion (5B-ASTM D3359) on various flexible substrates (PET, PEN and Kapton).Recommended surface treatment: temperature stabilization, argon plasma.
Nota sulla preparazione
- Qualified printheads: RICOH (MH5420), XAAR (1003 GS6, 128), KONIKA MINOLTA (KM512SHx, KM1024iMHE, KM1024LHB), FUJIFILM (Dimatrix DMP series cartridge)
- Storage stability: 6 months (fridge)
- Sintering conditions:
NIR: few seconds for 4-10mW.cm.
Photonic curing: <100 ms for 3-10mW.cm.
- Smart′Ink S-CS01120 conductive ink is warmed to room temperature (about 10 minutes) and left for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
- Filtration on a 0.45 μm PTFE filter syringe to avoid any nozzles clogging.
Note legali
Avvertenze
Danger
Indicazioni di pericolo
Consigli di prudenza
Classi di pericolo
Aquatic Acute 1 - Aquatic Chronic 1 - Asp. Tox. 1 - Eye Dam. 1 - Flam. Liq. 3 - Skin Irrit. 2 - Skin Sens. 1
Codice della classe di stoccaggio
3 - Flammable liquids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
104.0 °F
Punto d’infiammabilità (°C)
40 °C
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 risposta-
Utile?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 risposta-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfUtile?
-
-
About cleaning the nozzles and tubes of the printer. Will a Terpineol mix like 86480 remove the silver from the nozzles and equipment in general? My system is the MicroDrop MD-K-130/140 nozzles
1 risposta-
The effectiveness of Terpineol for cleaning purposes has not been investigated. Product 910643, a Cleaning Solution for Ag ink, is recommended. This Cleaning solution is a mixture of Terpineol and other components. Please see the link below to review this item:
https://www.sigmaaldrich.com/product/aldrich/910643Utile?
-
-
What is the diameter of the silver nanoparticles in this ink?
1 risposta-
The nanoparticles in this product have a diameter of 10nm.
Utile?
-
Filtri attivi
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
