Following surface preparation and oxidation removal, a solution of 1-Dodecanethiol in a suitable solvent, such as toluene or ethanol, should be prepared at a concentration typically between 1 and 10 mM. To achieve selective coating on one surface, a physical mask (e.g., tape or a polymer film) can be used to cover the areas of the copper foil that are not to be coated before immersing it in the 1-Dodecanethiol solution. Alternatively, a drop casting method can be used, whereby a drop of the 1-Dodecanethiol solution would be applied directly onto the desired surface and it would be allowed to spread out evenly. This method requires careful control to avoid spreading to the other side. The copper foil should then be immersed in the solution for a specified time (typically several hours) to allow the 1-Dodecanethiol molecules to self-assemble onto the exposed surface. After the desired time, the copper foil should be removed and rinsed gently with the same solvent used for the solution to remove any unbound thiol molecules.
471364
1-Dodecanethiol
≥98%
Sinonimo/i:
n-Dodecyl mercaptan, Dodecyl mercaptan, Lauryl mercaptan, Mercaptan C12, NDM
Scegli un formato
Scegli un formato
About This Item
Prodotti consigliati
Densità del vapore
7 (vs air)
Livello qualitativo
Saggio
≥98%
Indice di rifrazione
n20/D 1.459 (lit.)
P. ebollizione
266-283 °C (lit.)
Densità
0.845 g/mL at 25 °C (lit.)
Stringa SMILE
CCCCCCCCCCCCS
InChI
1S/C12H26S/c1-2-3-4-5-6-7-8-9-10-11-12-13/h13H,2-12H2,1H3
WNAHIZMDSQCWRP-UHFFFAOYSA-N
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Descrizione generale
Applicazioni
Avvertenze
Danger
Indicazioni di pericolo
Consigli di prudenza
Classi di pericolo
Aquatic Acute 1 - Aquatic Chronic 1 - Eye Dam. 1 - Skin Corr. 1C - Skin Sens. 1A
Codice della classe di stoccaggio
8A - Combustible corrosive hazardous materials
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
262.4 °F - closed cup
Punto d’infiammabilità (°C)
128 °C - closed cup
Dispositivi di protezione individuale
Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Articoli
To keep pace with Moore′s Law, there is a continuing need in the semiconductor industry to achieve higher circuit density in microelectronic devices.
Single molecule electronics is the endeavour of constructing electronic circuitry with single molecules as the fundamental building block.
Solvothermal synthesis of nanoparticles: applications from nanocircuits and nano-optical circuits to nanomagnetics and biotech.
Self-assembled monolayers (SAMs) have diverse applications; article compares benefits of alkylthiolates on gold SAM systems.
-
How do you coat copper foil with a single layer of 1-Dodecanethiol molecules on one surface only. Shielding the other surface with a tape does not work, because removing the tape can bend the foil and damage the coating.
1 risposta-
Utile?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 risposta-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Utile?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 risposta-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfUtile?
-
Filtri attivi
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
