Passa al contenuto
Merck
Tutte le immagini(3)

Documenti fondamentali

Visualizza tutta la documentazione

428043

Sigma-Aldrich

Polyethylene

low density, melt index 25 g/10 min (190°C/2.16kg)

Sinonimo/i:

PE

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali

Scegli un formato

250 G
51,60 €
1 KG
79,10 €

51,60 €

Per informazioni sulla disponibilità, contatta il Servizio Clienti.
Richiedi un ordine bulk
Tutte le immagini(3)

Scegli un formato

Cambia visualizzazione
250 G
51,60 €
1 KG
79,10 €

About This Item

Formula condensata:
H(CH2CH2)nH
Numero CAS:
9002-88-4
Numero MDL:
MFCD00084423
Codice UNSPSC:
12162002
ID PubChem:
24866794
NACRES:
NA.23

51,60 €

Per informazioni sulla disponibilità, contatta il Servizio Clienti.
Richiedi un ordine bulk

Stato

pellets

Indice di fluidità

25 g/10 min (190°C/2.16kg)

Resistenza all’urto

45.4 J/m (Izod, ASTM D 256, −50 °C, notched)

Punto di fusione

116 °C

Temp. transizione

softening point 93 °C (Vicat, ASTM D 1525)

Densità

0.925 g/mL at 25 °C

Stringa SMILE

C=C

InChI

1S/C2H4/c1-2/h1-2H2
VGGSQFUCUMXWEO-UHFFFAOYSA-N

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Categorie correlate

Applicazioni

Injection and blow molded toys, housewares and lids.

Caratteristiche e vantaggi

Good toughness, processability and appearance.

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3

Dispositivi di protezione individuale

Eyeshields, Gloves, type N95 (US)

Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number
0000236213
MKCT3838
0000253861
MKCS6157
MKCQ7391

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Cerca un COA

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 4

1 of 4

Polyethylene - Low Density (LDPE), granule, 5 mm nominal granule size, weight 200 g

GF45330757

Polyethylene - Low Density

High Density Polyethylene United States Pharmacopeia (USP) Reference Standard

USP

1546707

High Density Polyethylene

Polyethylene Ultra-high molecular weight, surface-modified, powder, 125 μm avg. part. size

Sigma-Aldrich

434264

Polyethylene

Polypropylene Isotactic, average Mw ~12,000, average Mn ~5,000

Sigma-Aldrich

428116

Polypropylene

Flora Rendell-Bhatti et al.
Environmental pollution (Barking, Essex : 1987), 269, 115744-115744 (2020-12-02)
Microplastic pollution has become ubiquitous, affecting a wide variety of biota. Although microplastics are known to alter the development of a range of marine invertebrates, no studies provide a detailed morphological characterisation of the developmental defects. Likewise, the developmental toxicity
Lisa K McCarthy et al.
Pediatrics, 132(1), e135-e141 (2013-06-19)
Hypothermia on admission to the NICU is associated with increased mortality in preterm infants. Many newborns are hypothermic on admission despite using polyethylene bags (PBs). Using exothermic mattresses (EMs) in addition to PBs may reduce hypothermia but increase hyperthermia. We
Katharine S Woods et al.
American journal of veterinary research, 74(4), 523-529 (2013-03-28)
To compare the diagnostic quality of bronchoalveolar lavage (BAL) fluid acquired from healthy dogs by manual aspiration via polyethylene tubing (MAPT) and via suction pump aspiration (SPA) with a suction trap connection. 12 healthy adult Beagles. BAL was performed with
Agnieszka Karbownik et al.
Acta poloniae pharmaceutica, 70(2), 301-307 (2013-04-26)
The study concerned the stability of calcium folinate in concentrate in glass vials and diluted in polyethylene (PE) bags stored at 15-25 degrees C and 2-8 degrees C for up to 34 days. Original vials of calcium folinate injection (10
Nina Bloecher et al.
Biofouling, 29(3), 237-246 (2013-02-27)
The hydroid Ectopleura larynx is one of the main fouling organisms on salmon aquaculture cages in Norway; this study investigated novel surface materials and microtopographies to deter its settlement. The settlement preferences of hydroid larvae for 12 materials with wettabilities
Visualizza tutti i documenti correlati

Domande

1–4 di 4 domande  

  1. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 risposta

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Utile?

  2. How can I determine the shelf life / expiration / retest date of this product?

    1 risposta

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Utile?

  3. What is the average molecular weight of this polymer?

    1 risposta

    1. The molecular weight of this item is not determined.

      Utile?

  4. You didn't point the size, Please write The particle sizes

    1 risposta

    1. The particle size is not determined. In general, pellets can range from 2-6 mm.

      Utile?

Recensioni

Nessuna valutazione

Filtri attivi

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.