336289
Titanium boride
powder, <10 μm
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Scegli un formato
50 G
75,70 €
Scegli un formato
Cambia visualizzazione
50 G
75,70 €
About This Item
Formula condensata:
TiB2
Numero CAS:
Peso molecolare:
69.49
Numero CE:
Numero MDL:
Codice UNSPSC:
12352300
ID PubChem:
NACRES:
NA.23
Prodotti consigliati
Stato
powder
Livello qualitativo
Dimensione particelle
<10 μm
Densità
4.52 g/mL at 25 °C (lit.)
Stringa SMILE
B#[Ti]#B
InChI
1S/2B.Ti
QYEXBYZXHDUPRC-UHFFFAOYSA-N
Categorie correlate
Applicazioni
- Surface Modifications to Reduce Wear in Hot Extrusion of Copper: Discusses the use of titanium boride in surface treatments to enhance the wear resistance of tools used in the hot extrusion of copper (Thewes et al., 2024).
- Stable DC Vacuum Arc Plasma Generation from a 100 mm TiB2 Cathode: Explores the use of titanium boride in generating stable plasma for coatings, emphasizing its efficiency and stability in industrial applications (Zhirkov et al., 2024).
- Structure Searches and Superconductor Discovery in XB2: Investigates various titanium boride compounds in the context of their structural properties and potential superconductivity applications (Meng et al., 2024).
Avvertenze
Warning
Indicazioni di pericolo
Consigli di prudenza
Classi di pericolo
Acute Tox. 4 Oral
Codice della classe di stoccaggio
11 - Combustible Solids
Classe di pericolosità dell'acqua (WGK)
WGK 3
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
dust mask type N95 (US), Eyeshields, Gloves
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
G S Vinod Kumar et al.
Physical chemistry chemical physics : PCCP, 9(48), 6415-6425 (2007-12-07)
In the present paper the authors studied isolated metallic films made from the same material used for making metallic foams, and then characterised their properties. Metal films were made from a liquid aluminium alloy reinforced with ceramic particles of known
Benoit Van Aken et al.
Water science and technology : a journal of the International Association on Water Pollution Research, 64(6), 1226-1232 (2012-01-05)
Extracellular DNA in municipal wastewater and effluents from hospitals and R&D laboratories contains antimicrobial resistance and recombinant genes that are today considered as a new class of emerging contaminants. The objective of this research was to investigate the effect of
S Dohshi et al.
Journal of nanoscience and nanotechnology, 1(3), 337-342 (2003-08-14)
Characterizations of Ti-B binary oxide thin films by means of various spectroscopic measurements have shown that Ti-B binary oxide thin films are formed by ultra fine TiO2 nanoparticles. A dramatic decrease in the contact angle of water droplets to 0
P Majumdar et al.
Journal of the mechanical behavior of biomedical materials, 10, 1-12 (2012-04-24)
The effect of heat treatment on the mechanical properties of Ti-35Nb-5.7Ta-7.2Zr (TNZT) and Ti-35Nb-5.7Ta-7.2Zr-0.5B (TNZTB) alloys has been investigated. In the case of TNZT alloy, the presence of ω phase in the matrix has a greater effect on strength and
I Dion et al.
Biomaterials, 14(2), 107-110 (1993-01-01)
Ceramics are more and more frequently under consideration for construction of blood-contacting devices, i.e. cardiac valves or cardiac assist devices. This study evaluated the haemolysis eventually initiated in vitro by ceramic powders (Al2O3, ZrO2/Y2O3, AlN, B4C, BN, SiC, Si3 N4
Filtri attivi
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
