1.52063
Chromolith® RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 100 mm x 3 mm HPLC Columns Validation Kit (3 Columns from 3 different batches)
别名:
Chromolith® RP-18 endcapped 100-3 HPLC columns Validation Kit (3 columns from 3 different batches)
登录查看公司和协议定价
所有图片(1)
About This Item
分類程式碼代碼:
41115700
NACRES:
SB.52
推荐产品
product name
Chromolith® RP-18封端, L × I.D. 100 mm x 3 mm HPLC columns Validation Kit (3 columns from 3 different batches)
材料
PEEK column
品質等級
agency
suitable for USP L1
產品線
Chromolith®
特點
endcapped
包裝
pkg of 3 ea
標籤範圍
18% Carbon loading
參數
200 bar pressure
45 °C max. temp.
技術
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
柱長度 × 內徑
10 cm × 3 mm
基質
monolithic silica
基質活性組
C18 bonding phase
孔徑
13 nm mesoporosity
2 μm macroporosity
工作pH值範圍
2-7.5
分離技術
reversed phase
儲存溫度
no temp limit
正在寻找类似产品? 访问 产品对比指南
一般說明
Chromolith® RP-18 endcapped 100-3 HPLC columns Validation Kit consists of 3 columns from 3 different manufacturing batches.
Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure.
Chromolith® Performance RP-18 endcapped 100-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Performance RP-18 endcapped 100-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith® Performance RP-18 endcapped 100-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 100 mm length and 3 mm I.D. is the best choice for fast separations of complex samples on any HPLC and UHPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith® Guard Cartridge Holder 5 mm x 3 mm [1.52004]
Holder and guard cartridges are also available as Guard cartridge set [1.52008]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure.
Chromolith® Performance RP-18 endcapped 100-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Performance RP-18 endcapped 100-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith® Performance RP-18 endcapped 100-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 100 mm length and 3 mm I.D. is the best choice for fast separations of complex samples on any HPLC and UHPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith® Guard Cartridge Holder 5 mm x 3 mm [1.52004]
Holder and guard cartridges are also available as Guard cartridge set [1.52008]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
法律資訊
Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany
商品
Monolithic silica HPLC columns enable high-throughput analysis at low back pressure without loss of separation efficiency or peak capacity.
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门