跳转至内容
Merck

655201

Sigma-Aldrich

PEDOT:PSS

greener alternative

high-conductivity grade, 3.0-4.0% aqueous dispersion

别名:

PEDOT:PSS, 聚(2,3-二氢噻吩并-1,4-二恶英)-聚(苯乙烯磺酸盐)

登录查看公司和协议定价


About This Item

MDL號碼:
分類程式碼代碼:
12352103
NACRES:
NA.23

product name

聚乙撑二氧噻吩-聚 苯乙烯磺酸盐, 3.0-4.0% in H2O, high-conductivity grade

等級

high-conductivity grade

環保替代產品特色

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

濃度

3.0-4.0% in H2O

電阻

1500 Ω/sq, 4 point probe measurement of dried coating based on initial 6μm wet thickness.
500 Ω/sq, 4 point probe measurement of dried coating based on initial 18μm wet thickness.

pH值

1.5-2.5 (25 °C, dried coatings)

傅導性

>200 S/cm

黏度

10-30 cP(20 °C)

密度

1.011 g/cm3 (dried coatings)

環保替代類別

儲存溫度

2-8°C

正在寻找类似产品? 访问 产品对比指南

一般說明

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is an organic semiconductor prepared by doping cationic poly(3,4-ethylenedioxythiophene) and poly(4-styrenesulfonate) anion. Its high electrical conductivity and good oxidation resistance make it suitable for electromagnetic shielding and noise suppression. PEDOT:PSS based polymeric films have a high transparency throughout the visible light spectrum and even in near IR and near UV regions, with virtually 100% absorption from 900-2000 nm. PEDOT provides the conduction properties and PSS forms a hydrated colloidal solution.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.

應用

Electrical conductivity measurements herewith reported were on a film deposited by spin-coating on a clean glass, then dried (130 °C for 15 minutes on a hotplate). The layer thickness was determined by scratching the layer and measuring the profile/height of the scratch by a stylus profilometer. Electrodes for the measurement were by evaporating metal contacts (four-point probes).
PEDOT:PSS is an intrinsically conductive polymer (ICP) that can be coated on various substrates and nanostructures like fullerenes (C60) to form composites with high electrochemical properties for applications like low-cost printed electronics, optoelectronics, and polymeric solar cells. It can be used as a conductive hydrogel with polyethylene glycol-diacrylate (PEG-DA) for potential applications in tissue engineering. PEDOT:PSS also finds use in other organic electronic applications like organic thin film transistors (OTFTs) and dye sensitized solar cells (DSSCs).
Ready-to-use high conductivity coating formulation.
从900nm到2000nm几乎100%吸收。从400nm到800nm无最大吸收。 导电聚合物混合。

包裝

塑料瓶包装

象形圖

Corrosion

訊號詞

Danger

危險聲明

危險分類

Eye Dam. 1 - Skin Corr. 1

儲存類別代碼

8B - Non-combustible corrosive hazardous materials

水污染物質分類(WGK)

WGK 3

閃點(°F)

Not applicable

閃點(°C)

Not applicable

個人防護裝備

Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter


分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ (Lot或Batch)字后找到。

已有该产品?

在文件库中查找您最近购买产品的文档。

访问文档库

Mechanically robust, photopatternable conductive hydrogel composites.
Pal R, et al.
Reactive and Functional Polymers, 120(5), 66-73 (2017)
Dye sensitized solar cells (DSSCs) based on modified iron phthalocyanine nanostructured TiO2 electrode and PEDOT: PSS counter electrode.
Balraju P, et al.
Synthetic Metals, 159(13), 1325-1331 (2009)
Fine patterning of glycerol-doped PEDOT: PSS on hydrophobic PVP dielectric with ink jet for source and drain electrode of OTFTs
Lee M, et al.
Organic Electronics, 11(5}, 854-859 (2010)
New Conducting and Semiconducting Polymers for Organic Photovoltaics.
Sapp S and Luebben S
MRS Online Proceedings Library, 1270(4), 261-266 (2010)
Junhwan Jang et al.
Nanomaterials (Basel, Switzerland), 10(12) (2020-12-03)
Graphene oxide (GO)-cysteamine-Ag nanoparticles (GCA)-silver nanowire (AgNW) fabricated by depositing GCA over sprayed AgNWs on PET films were proposed for transparent and flexible electrodes, and their optical, electrical, and mechanical properties were analyzed by energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy

商品

In the field of organic printable electronics, such as OLEDs and organic photovoltaics (OPVs), improved organic conducting and semiconducting materials are needed. The progress in two fields is reviewed in this article.

Conducting polymers such as polyaniline, polythiophene and polyfluorenes are now much in the spotlight for their applications in organic electronics and optoelectronics.

Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.

Progress in Organic Thermoelectric Materials & Devices including high ZT values of >0.2 at room temperature by p-type (PEDOT:PSS) & n-type (Poly[Kx(Ni-ett)]) materials are discussed.

查看所有结果

我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门