If the column does not perform as expected after rehydration and running the QA test method, it should be cleaned according to the instructions. Then, the mobile phase should be equilibrated again, and the QA method should be rerun. If the column still does not perform as expected, it may not be regeneratable and will need to be replaced.
807164
TSKgel® DEAE-5PW (10 µm) HPLC Columns
L x I.D. 7.5 cm × 7.5 mm, DEAE (diethylaminoethyl) phase
About This Item
Empfohlene Produkte
Produktbezeichnung
TSKgel® DEAE-5PW HPLC Column, phase DEAE (diethylaminoethyl), L × I.D. 7.5 cm × 7.5 mm, 10 μm particle size
Materialien
PEEK
Produktlinie
TSKgel®
Leistungsmerkmale
counter ion Cl-
Hersteller/Markenname
Tosoh 07164
Parameter
≤1 M salt concentration
≤20% organic solvent
1.2 mL/min flow rate
10-45 °C temperature
150 bar max. pressure
Methode(n)
HPLC: suitable
L × ID
7.5 cm × 7.5 mm
Matrix
polymer particle platform
Aktive Matrixgruppe
DEAE (diethylaminoethyl) phase
Partikelgröße
10 μm
Porengröße
1000 Å
Betriebs-pH-Wert
2-12
Trenntechnik
anion exchange
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Verwandte Kategorien
Allgemeine Beschreibung
Physikalische Form
Rechtliche Hinweise
Vorsäulenkartusche
Hier finden Sie alle aktuellen Versionen:
Analysenzertifikate (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumente section.
Wenn Sie Hilfe benötigen, wenden Sie sich bitte an Kundensupport
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Kunden haben sich ebenfalls angesehen
-
What should be done before restarting the use of a DEAE column, and which buffer can be used to check if the DEAE column is still working?
1 Antwort-
Hilfreich?
-
Aktive Filter
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.