Yes, it can be re-filled.
Z264946
Aldrich® glass pH electrode
BNC connector
Anmeldenzur Ansicht organisationsspezifischer und vertraglich vereinbarter Preise
Größe auswählen
1 EA
163,00 €
163,00 €
Versandbereit am25. April 2025Details
Alle Fotos(1)
Größe auswählen
Ansicht ändern
1 EA
163,00 €
About This Item
UNSPSC-Code:
41115603
NACRES:
NB.79
163,00 €
Versandbereit am25. April 2025Details
Empfohlene Produkte
Parameter
−5-110 °C temperature
Suchen Sie nach ähnlichen Produkten? Aufrufen Leitfaden zum Produktvergleich
Allgemeine Beschreibung
For applications where a separate reference electrode is required. Fast response over the full pH range with low sodium ion error. Useful for highly acidic or highly alkaline samples.
Help in selecting the correct electrode can be viewed at Electrode Selection Guide
Hints on Electrode Maintenance
Help in selecting the correct electrode can be viewed at Electrode Selection Guide
Hints on Electrode Maintenance
Rechtliche Hinweise
Aldrich is a registered trademark of Sigma-Aldrich Co. LLC
Ähnliches Produkt
Produkt-Nr.
Beschreibung
Preisangaben
Hier finden Sie alle aktuellen Versionen:
Analysenzertifikate (COA)
Lot/Batch Number
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Dokumente section.
Wenn Sie Hilfe benötigen, wenden Sie sich bitte an Kundensupport
Besitzen Sie dieses Produkt bereits?
In der Dokumentenbibliothek finden Sie die Dokumentation zu den Produkten, die Sie kürzlich erworben haben.
Kunden haben sich ebenfalls angesehen
-
Is the electrode "Z264946" refillable?
1 Antwort-
Hilfreich?
-
-
Please provide user guide for Z264946 Aldrich® glass pH electrode.
1 Antwort-
A user guide is not available for this product. See the usage instructions below:
PREPARATION FOR USE:
1. Wet lower end of electrode in tap water. Carefully remove the lower cap.
NOTE: The cap is used only for shipping and storage. You might want to keep it for later use.
2. If air bubbles are present in the bulb area, shake downwards to displace any air bubbles in the bulb.
pH MEASUREMENT:
1. Thoroughly rinse the electrode tip in distilled water and insert electrode tip in a known buffer, close to the sample to be tested, along with an appropriate reference electrode.
2. Adjust the ‘standardize’ control on the pH meter until the meter reads the value of the buffer.
3. Thoroughly rinse the electrodes with distilled water, then insert the electrodes in the solution to be tested.
NOTE: The electrode tips should be rinsed in distilled water between each measurement to prevent contamination of the next solution.
STORAGE PROCEDURES:
1. For short storage (up to one week), the electrode may be placed in a beaker containing approximately 1 inch saturated KCl solution.
2. For long-term storage (over one week), fill storage cap with KCl solution and place the cap back on the electrode tip.
The electrode may then be placed back in the box and stored.Hilfreich?
-
Aktive Filter
Unser Team von Wissenschaftlern verfügt über Erfahrung in allen Forschungsbereichen einschließlich Life Science, Materialwissenschaften, chemischer Synthese, Chromatographie, Analytik und vielen mehr..
Setzen Sie sich mit dem technischen Dienst in Verbindung.
