VPMKVALNB9

Viresolve^® Pro Device

Parvovirus removal filter, Micro 40 kit, filtration area 3.4 cm²

• Synonyma: Viresolve^® Pro Device Micro 40 Kit
• UNSPSC Code: 41110000

Vlastnosti

• material: polyethersulfone membrane ((PES)); white PVDF device (molded parts)
• Quality Level: 400
• parameter: 4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)
• H × diam. × filtration area: 4.03 cm (1.59 in.) × 4.37 cm (1.72 in.) × 3.4 cm²
• filtration area: 3.4 cm²
• weight: 14.73 gempty
• impurities: may contain <0.25 EU/mL bacterial endotoxins (LAL test)
• fitting: female Luer-Lok^® inlet (inlet and vent); male Luer outlet (Slip)
• storage temp.: no temp limit

Popis

General description

The Viresolve^® Pro Micro 40 Kit is ideally suited for performing your filter sizing and viral clearance evaluations. Each kit contains 3 sets of 3 Micro 40 Devices from three different membrane layering combinations* and certificate of quality. Every Viresolve^® Pro Device Micro 40 undergoes a Binary Gas Test before product release ensuring optimum quality and performance consistency.

*Viresolve^® Pro Devices are built with two membrane layers. Each Viresolve^® Pro Device Micro 40 is packaged in a blister pack and labeled with the device lot and the top layer membrane lot/roll number.

Application

Process development, studies, Viral clearance, evaluations

Features and Benefits

• Small scale devices for process development, optimization and validation studies
• Membrane based adsorptive prefilters to remove protein aggregates and other fouling species
• Nine units per kit (one Membrane lot)

Other Notes

These products are non-fiber releasing filters as defined in 21 CFR 210.3(b).

Legal Information

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany