SLGPB5010

Millex^® polyethersulfone inline filter

pore size 0.22 μm, diam. 50 mm, sterile, hydrophilic, 1/4-1/2 in. hose barb with outlet bell

• Synonyma: 0.22 μm PES syringe filter, Express PLUS^™ PES in-line filter, Millex-GP in-line filter with filling bell, Millex^® 50 mm Filter Unit, Millex^® GP50, disposable syringe filter, polyethersulfone syringe filter, sterile pressure filter unit
• UNSPSC Code: 41104922
• eCl@ss: 32031690
• NACRES: NB.22

Vlastnosti

• material: methacrylate-butadiene-styrene (MBS) housing; polyethersulfone membrane
• Quality Level: 400
• sterility: γ-irradiated; sterile
• product line: Millex^®
• feature: holdup volume< 1 mL; hydrophilic; Research Use Only (RUO)
• manufacturer/tradename: Millex^®
• parameter: 3.3 bar max. inlet pressure (50 psi); 45 °C max. temp.; ~390 mL/min water flow rate at 15 psig
• technique(s): fast flow filtration: suitable; low protein-binding filtration: suitable; pressure filtration: suitable; sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions)
• diam.: 50 mm
• filtration area: 19.6 cm² (3 in²)
• housing diam.: 62 mm
• inlet to outlet H: 96 mm , including bell
• volume: 4000-8000 mL
• matrix: Express PLUS^™
• pore size: 0.22 μm
• input: tissue culture medium; aqueous solution(s)
• fitting: inlet stepped hose barb (1/4-1/2 in, with Female Luer slip interior); outlet filling bell
• shipped in: ambient

Popis

General description

The bi-directionally supported Millex-GP₅₀ filter is a sterilizing filter for aqueous solutions.It removes microorganisms, particles, precipitates, and undissolved powders largerthan 0.22 micron (μm). The sterile Millex-GP₅₀ filter is non-pyrogenic and non-toxic. Thissingle-use product consists of a 0.22 μm membrane filter sealed in an acrylic housing.

Application

Sterile filtration of tissue culture media, additives,buffers, and water.

Preparation Note

• For use with peristaltic pump, a pump drive and pump head that delivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates an average flow rate of 100 mL/min.
• Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing

Other Notes

• For use with peristaltic pump, a pump drive and pump head thatdelivers a constant speed of 60 revolutions per minute (rpm) is recommended. This generates anaverage flow rate of 100 mL/min.
• Recommended tubing: 4-9.5 mm I.D. silicone rubber or latex tubing

Legal Information

EXPRESS PLUS is a trademark of Merck KGaA, Darmstadt, Germany

Millex is a registered trademark of Merck KGaA, Darmstadt, Germany