MPGPG02A1

Millipak^® Gold Filter

For particulates- and bacteria-free water at the point of dispense of the Milli-Q^® 7 series water purification systems.

• Synonyma: Millipak^® Gold 0.22 μm Sterile Filter
• UNSPSC Code: 41104212
• eCl@ss: 33050190
• NACRES: NB.24

Vlastnosti

• material: polyethersulfone filter
• Quality Level: 300
• sterility: sterile
• feature: hydrophilic
• packaging: pkg of 1 unit
• manufacturer/tradename: Millipak^®
• outlet connection diam.: 1/4 in.
• pore size: 0.22 μm pore size
• fitting: outlet stepped hose barb (with bell)
• compatibility: for use with Milli-Q^® EQ 7000; for use with Milli-Q^® EQ 7008; for use with Milli-Q^® EQ 7016; for use with Milli-Q^® IX 7003; for use with Milli-Q^® IX 7005; for use with Milli-Q^® IX 7010; for use with Milli-Q^® IX 7015; for use with Milli-Q^® IQ 7000; for use with Milli-Q^® IQ 7003; for use with Milli-Q^® IQ 7005; for use with Milli-Q^® IQ 7010; for use with Milli-Q^® IQ 7015
• shipped in: ambient

Popis

General description

Millipak^® Gold 0.22 μm sterile filter is a lab water consumable made up of PES (polyethersulfone) that is exclusively designed to remove particulates and bacteria from purified water. Here, the water is purified by filtering through a 0.22 μm sterilizing-grade membrane.
The membrane in the Millipak^® filter consists of conical pores that allow the water to filter at a higher flow rate with low differential pressure. The filter is heat-sealed on SAN (styrene-acrylonitrile) housing material. The housing material, along with the membrane and the production processes are carefully chosen to reduce organic and inorganic extractable release.
Millipak^® Gold 0.22 μm sterile filter is suitable for use with Milli-Q^® IQ 7000, Milli-Q^® IQ 7003/05/10/15, Milli-Q^® IX 7003/05/10/15 and Milli-Q^® EQ 7000/08/16 water purification systems.

Application

Millipak^® Gold 0.22 μm sterile filter when fed with Milli-Q^® purified water is used in a variety of laboratory applications including cell culture and microbiology.

Features and Benefits

• Each Millipak^® Gold 0.22 μm filter is individually tested, hermetically sealed and delivered with a Certificate of Quality.
• Delivers bacteria-free water at <0.01 cfu/mL when installed and used in a laminar flow hood.
• Delivers particulate-free water (no particles with size >0.22 μm).
• Carefree maintenance: Easily installed and replaced.
• Redesigned bottom-tip for a secured installation of the protection bell.
• e-Sure tag for RFID connection with E-POD^® or Q-POD^® dispenser enables full traceability (data management) and automatic consumable status monitoring on the POD′s touchscreen interface.

Other Notes

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in a dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

E-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany

Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

Bezpečnostní informace

• Storage Class: 11 - Combustible Solids