Passa al contenuto
Merck
Tutte le immagini(3)

Documenti fondamentali

Visualizza tutta la documentazione

310506

Sigma-Aldrich

Sodium bromide

ACS reagent, ≥99.0%

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali

Scegli un formato

100 G
CHF 32.50
500 G
CHF 118.00

CHF 32.50

Spedizione prevista il23 maggio 2025

Questo codice SKU è disponibile con grado ACS anche nella nostra esclusiva linea Redi-Dri™ di prodotti free-flowing.
Richiedi un ordine bulk
Tutte le immagini(3)

Scegli un formato

Cambia visualizzazione
100 G
CHF 32.50
500 G
CHF 118.00

About This Item

Formula condensata:
NaBr
Numero CAS:
7647-15-6
Peso molecolare:
102.89
Numero CE:
231-599-9
Numero MDL:
MFCD00003475
Codice UNSPSC:
12352302
eCl@ss:
38050404
ID PubChem:
329753628
NACRES:
NA.21

CHF 32.50

Spedizione prevista il23 maggio 2025

Questo codice SKU è disponibile con grado ACS anche nella nostra esclusiva linea Redi-Dri™ di prodotti free-flowing.
Richiedi un ordine bulk

Grado

ACS reagent

agenzia

suitable for EPA 300

Tensione di vapore

1 mmHg ( 806 °C)

Saggio

≥99.0%

Stato

powder, crystals or granules

Impurezze

≤0.005% insolubles

pH

5.0-8.8 (25 °C, 5%)

Punto di fusione

755 °C (lit.)

Solubilità

ethanol: soluble(lit.)
water: soluble(lit.)

Anioni in tracce

bromate (BrO3-): ≤0.001%
chloride (Cl-): ≤0.2%
sulfate (SO42-): ≤0.002%

Cationi in tracce

Ba: ≤0.002%
Ca: ≤0.002%
Fe: ≤5 ppm
K: ≤0.1%
Mg: ≤0.001%
heavy metals: ≤5 ppm (by ICP-OES)

Stringa SMILE

[Na+].[Br-]

InChI

1S/BrH.Na/h1H;/q;+1/p-1
JHJLBTNAGRQEKS-UHFFFAOYSA-M

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Categorie correlate

Descrizione generale

Sodium Bromide is an inorganic compound that is commonly used as a source of bromide ions as a nucleophile or nucleophilic catalyst. It is also used as a precursor to reactive electrophilic bromine species, which are useful for a variety of organic transformations.

Applicazioni

Sodium Bromide can be used as a catalyst in TEMPO-mediated oxidation reactions. It is also used to grow the single crystal of γ-glycine by the slow cooling method.

Altre note

Go to Redi-Dri™ Product Listing 793574

Note legali

Redi-Dri is a trademark of Sigma-Aldrich Co. LLC

Pittogrammi

Health hazardExclamation mark
GHS08,GHS07

Avvertenze

Warning

Indicazioni di pericolo

H336,H361fd,H373

Classi di pericolo

Repr. 2 - STOT RE 2 - STOT SE 3

Organi bersaglio

Central nervous system

Codice della classe di stoccaggio

13 - Non Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 1

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number
0000421271
0000421271
0000312784
0000312784
0000252586

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Cerca un COA

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 6

1 of 6

Isotopic standard for bromine NIST® SRM® 977

NIST977

Isotopic standard for bromine

Bromuro di potassio ACS reagent, ≥99.0%

Sigma-Aldrich

243418

Bromuro di potassio

1-Bromobutane ReagentPlus®, 99%

Sigma-Aldrich

B59497

1-Bromobutane

Sodium nitrate ≥99.0%, suitable for plant cell culture

Sigma-Aldrich

S5022

Sodium nitrate

Ioduro di sodio ACS reagent, ≥99.5%

Sigma-Aldrich

383112

Ioduro di sodio

1-butanolo ACS reagent, ≥99.4%

Sigma-Aldrich

360465

1-butanolo

Eagleson M.
Concise Encyclopedia Chemistry, 996-996 (1994)
Ling Yue et al.
Applied biochemistry and biotechnology, 175(7), 3557-3570 (2015-02-05)
A novel aqueous two-phase system (ATPS) only containing Gemini surfactant ethanediyl-1,2-bis(dodecyldimethylammonium bromide) and an inorganic salt sodium bromide was designed, and the physicochemical properties of the ATPS were investigated systematically. The results have shown that the coexisting two phases, one
Sergiu Coseri et al.
Carbohydrate polymers, 116, 9-17 (2014-12-03)
Unoxidized and carboxylated pullulan (obtained by pullulan oxidation using TEMPO-sodium hypochlorite-sodium bromide system) have been used as mediators for the silver nanoparticles formation (AgNPs), under environment-friendly conditions: using aqueous solutions, room temperature and notably, by using both mediators as reducing
Sodium bromide catalysed one-pot synthesis of tetrahydrobenzo [b] pyrans via a three-component cyclocondensation under microwave irradiation and solvent free conditions.
Devi I and Bhuyan PJ.
Tetrahedron Letters, 45(47), 8625-8627 (2004)
Density, viscosity, and electrolytic conductivity of concentrated aqueous electrolyte solutions at several temperatures. Alkaline-earth chlorides, lanthanum chloride, sodium chloride, sodium nitrate, sodium bromide, potassium nitrate, potassium bromide, and cadmium nitrate.
Isono T.
Journal of Chemical and Engineering Data, 29(1), 45-52 (1984)
Visualizza tutti i documenti correlati

Contenuto correlato

Environmental Methods Consumables Look Up Tool

This page is intended to make it easier to find the consumables you need based on the analytical method you’re using. Methods included on this page come from the EPA, Standard Methods and ASTM.

Questions

1–2 of 2 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

Reviews

No rating value

Active Filters

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.