Passa al contenuto
Merck
Tutte le immagini(1)

Documenti fondamentali

AX0115

Supelco

Acetone

HPLC, Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs

Sinonimo/i:

Dimethyl Ketone, 2-Propanone

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Formula condensata:
CH3COCH3
Numero CAS:
Peso molecolare:
58.08
Beilstein:
635680
Numero MDL:
Codice UNSPSC:
12352115
Numero indice EU:
200-662-2
Prezzi e disponibilità al momento non sono disponibili

Grado

reagent

Livello qualitativo

agenzia

meets USP/NF

Densità del vapore

2 (vs air)

Tensione di vapore

184 mmHg ( 20 °C)

Saggio

≥99.5% (corrected for water content, GC)

Stato

liquid

Limite di esplosione

13.2 %

tecniche

HPLC: suitable

Impurezze

≤0.0003 meq/g Titrable acid
≤0.0006 meq/g Titrable base
≤0.002% Aledhyde (as HCHO)
≤0.05% Isopropyl Alcohol
≤0.05% Methanol
≤0.5% Water

Residuo dopo evaporazione

≤5 ppm

Colore

clearAPHA: ≤10

Indice di rifrazione

n20/D 1.359 (lit.)

pH

5-6 (20 °C, 395 g/L in H2O)

P. ebollizione

56 °C/760 mmHg (lit.)

Punto di fusione

−94 °C (lit.)

Temp. transizione

flash point <-20 °C

Densità

0.791 g/mL at 25 °C (lit.)

λmax

≤330 nm

Assorbanza UV

λ: 330 nm Amax: ≤1.00
λ: 340 nm Amax: ≤0.10
λ: 350 nm Amax: ≤0.02
λ: 400 nm Amax: ≤0.01

Formato

neat

Condizioni di spedizione

ambient

Temperatura di conservazione

room temp

Stringa SMILE

CC(C)=O

InChI

1S/C3H6O/c1-3(2)4/h1-2H3
CSCPPACGZOOCGX-UHFFFAOYSA-N

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Applicazioni

L′intensità della luminescenza dell′acetone dipende dai componenti della soluzione. L′assorbimento di luce UV da parte dell′acetone risulta nella sua fotolisi con produzione di radicali .
AX0115P-1 and AX0115P-6 are packaged in poly-coated glass bottles.
HPLC, Meets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs

Nota sulla preparazione

Product filtered through a 0.2 μm filter

Risultati analitici

Aldehyde (as HCHO): 0.002% max
Appearance: Clear liquid, free from particulates
Assay (GC, corrected for water content): 99.5% min
Color (APHA): 10 max
Evaporation residue: 5ppm max
Filtered through 0.2 m filter: To pass test
Form: Liquid
Infrared Spectrum: Conforms to standard
Isopropyl alcohol: 0.05% max
Methanol: 0.05% max
Solubility in water: To pass test
Substances reducing permanganate: To pass test
Titrable acid: 0.0003meq/g max
Titrable base: 0.0006meq/g max
UV Abs. at 330 nm: 1.00AU max
UV Abs. at 340 nm: 0.10AU max
UV Abs. at 350 nm: 0.02AU max
UV Abs. at 400 nm: 0.01AU max
UV Cut-off: 330nm max
Water (H2O): 0.5% max

Pittogrammi

FlameExclamation mark

Avvertenze

Danger

Indicazioni di pericolo

Classi di pericolo

Eye Irrit. 2 - Flam. Liq. 2 - STOT SE 3

Organi bersaglio

Central nervous system

Rischi supp

Codice della classe di stoccaggio

3 - Flammable liquids

Classe di pericolosità dell'acqua (WGK)

WGK 1

Punto d’infiammabilità (°F)

1.4 °F - closed cup

Punto d’infiammabilità (°C)

-17.0 °C - closed cup


Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 2

1 of 2

Acetone suitable for HPLC, &#8805;99.8%

Sigma-Aldrich

34850

Acetone

Acetone suitable for HPLC, &#8805;99.9%

Sigma-Aldrich

439126

Acetone

Questions

  1. What pressure should be applied to dispense the chemical contained in a NOWPak 20-liter container?

    1 answer
    1. To dispense the chemical from the NOWPak, the pressure needs to be vented completely and then slowly increased to a maximum of 5 psi. The dispensing product flow should be adequate at this pressure. It's important to note that this container is not designed for high dispensing flow rates. As the liquid volume decreases, adjustments may be needed to increase the pressure, but it should never exceed 10 psi. Applying maximum pressure from the beginning risks material leakage around the bag collar, potential bag rupture, and material getting between the bag and the shell.

      Helpful?

Reviews

No rating value

Active Filters

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.