The density of the solution is 1.4 g/mL at 25 °C, but the density of the silica particles is not tested. A gas displacement pycnometer is the recommended method for testing the density
420778
LUDOX® TM-50 colloidal silica
LUDOX® TM-50 colloidal silica
1 of 1 reviewers received a sample product or took part in a promotion
50 wt. % suspension in H2O
Sinonimo/i:
Silica preparation
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Formula condensata:
SiO2
Numero CAS:
Peso molecolare:
60.08
Numero MDL:
Codice UNSPSC:
12352309
ID PubChem:
NACRES:
NA.22
Prezzi e disponibilità al momento non sono disponibili
Prodotti consigliati
Descrizione
colloidal
Livello qualitativo
Stato
viscous liquid
Concentrazione
50 wt. % suspension in H2O
Area superficiale
~140 m2/g
pH
9.0
Densità
1.4 g/mL at 25 °C
Stringa SMILE
O=[Si]=O
InChI
1S/O2Si/c1-3-2
VYPSYNLAJGMNEJ-UHFFFAOYSA-N
Cerchi prodotti simili? Visita Guida al confronto tra prodotti
Descrizione generale
LUDOX® TM-50 colloidal silica is an aqueous dispersion of silica particles with intermediate particle size and narrow particle size distribution.
Applicazioni
LUDOX® TM-50 colloidal silica can be used:
- As a silica source to synthesize tetrapropylammonium(TPA)-silicate-1 colloidal particles.[1]
- As a removable template to prepare mesoporous carbon materials by using a resorcinol-formaldehyde resin as a carbon precursor.[2]
- As a separation layer to synthesize non-spherical flexible poly(butylacrylate) (PBA) polymer particles by concentrated emulsion polymerization.[3]
Note legali
LUDOX is a registered trademark of W.R. Grace & Co.-Conn.
Codice della classe di stoccaggio
12 - Non Combustible Liquids
Classe di pericolosità dell'acqua (WGK)
nwg
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
The synthesis of discrete colloidal particles of TPA-silicalite-1.
Persson AE, et al.
Zeolites, 14(7), 557-567 (1994)
Templating synthesis of non-spherical polymer particles and their effect on the fracture toughness of an epoxy-amine network.
Du Z, et al.
Polymer International, 56(1), 82-87 (2007)
Preparation of Pt supported on mesoporous carbons for the reduction of oxygen in polymer electrolyte membrane fuel cell (PEMFC).
Joo JB, et al.
Journal of electroceramics, 17(2-4), 713-718 (2006)
Graham J Edgar et al.
Nature, 506(7487), 216-220 (2014-02-07)
In line with global targets agreed under the Convention on Biological Diversity, the number of marine protected areas (MPAs) is increasing rapidly, yet socio-economic benefits generated by MPAs remain difficult to predict and under debate. MPAs often fail to reach
Yaswanth Kuthati et al.
Journal of nanoscience and nanotechnology, 13(4), 2399-2430 (2013-06-15)
The advent of Nanotechnology has paved a way for improved disease treatment strategies, the most noteworthy being the mesoporous silica nanoparticles (MSNs) which have gained much recent attention in the field of cancer therapy and its diagnosis. The flaws of
-
What is the density of the silica nanoparticles themselves? Is there a recommended way to measure this?
1 answer-
Helpful?
-
-
How is shipping temperature determined? And how is it related to the product storage temperature?
1 answer-
Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf
Helpful?
-
-
How can I determine the shelf life / expiration / retest date of this product?
1 answer-
If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdfHelpful?
-
-
Is this solution white coloured or is it transparent? Is it suitable for using as colourant in cosmetics manufacturing?
1 answer-
This product is a cloudy liquid. This product is not suitable for cosmetic manufacturing. Unless otherwise stated, this product is intended for research use only. It is unsuitable for any other purpose, including, but not limited to, unauthorized commercial use, in vitro diagnostic use, or therapeutic use in humans or animals.
Helpful?
-
-
What is the smallest size of the silica particles?
1 answer-
The Ludox products have an average particle size range of 7nm to 22nm. Please see the Ludox product comparison table below:
Helpful?
-
-
Is the density of 1.4 g/mL at 25 °C for Ludox silica nanoparticles product 420778 the density of the nanoparticles themselves or the density of the colloidal suspension?
1 answer-
The density value indicated for the product 420778 represents the colloidal density, not that of the individual silica nanoparticles.
Helpful?
-
-
Is this product stabilized with some chemicals or is pure SiO2?
1 answer-
This product is an aqueous dispersion of silica particles in water. There are no stabilizers or preservatives present. Please see the link below to review a sample Certificate of Analysis:
https://www.sigmaaldrich.com/certificates/sapfs/PROD/sap/certificate_pdfs/COFA/Q14/420778-BULKMKCT8562.pdfHelpful?
-
Active Filters
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.
