Direkt zum Inhalt
Merck
  • Photodegradation of non-ionic surfactant with different ethoxy groups in aqueous effluents by the photo-Fenton process.

Photodegradation of non-ionic surfactant with different ethoxy groups in aqueous effluents by the photo-Fenton process.

Environmental technology (2014-04-08)
Syllos S da Silva, Osvaldo Chiavone-Filho, Eduardo L de Barros Neto, Andre L N Mota, Edson L Foletto, Claudio A O Nascimento
ZUSAMMENFASSUNG

The photo-Fenton process was applied to degrade non-ionic surfactants with different numbers of ethoxy groups, seven (E7), ten (E10) and twenty-three (E23). The effects of H2O2 concentration, Fe(II) concentration and number of ethoxy groups on the mineralization of surfactants were investigated. The response surface methodology (RSM) was applied to determine optimal concentrations of Fenton's reagents for each surfactant. The efficiency of the photo-Fenton process reached 95% for all surfactants studied at 45 min in optimal conditions determined in this work. The analysis of results showed that the efficiency depends upon the number of ethoxy groups in the surfactant. The increase in ethoxy groups favoured the mineralization of surfactants. The analysis of variance (ANOVA) was applied, and according to the F-test the models for the mineralization of surfactants were considered significant and predictable. The photo-Fenton process has proven to be feasible for the degradation of ethoxylated surfactants in aqueous solution.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Wasserstoffperoxid -Lösung, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Wasserstoffperoxid -Lösung, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Wasserstoffperoxid-Lösung, 30% (w/w), puriss. p.a., reag. ISO, reag. Ph. Eur.
Sigma-Aldrich
Eisen, ≥99%, reduced, powder (fine)
Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Wasserstoffperoxid -Lösung, purum p.a., ≥35% (RT)
Sigma-Aldrich
Carbonyleisen, ≥97% Fe basis
Sigma-Aldrich
Eisen, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
Eisen, powder, −325 mesh, 97%
Sigma-Aldrich
Eisen, granular, 10-40 mesh, >99.99% trace metals basis
Millipore
Wasserstoffperoxid -Lösung, 3%, suitable for microbiology
Sigma-Aldrich
Eisen, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Eisen, chips, 99.98% trace metals basis
Sigma-Aldrich
Eisen, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
Wasserstoffperoxid -Lösung, 34.5-36.5%
Sigma-Aldrich
Wasserstoffperoxid -Lösung, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications
Supelco
Wasserstoffperoxid -Lösung, ≥30%, for trace analysis
Eisen, foil, 100x100mm, thickness 0.25mm, hard, 99.5%
Supelco
Wasserstoffperoxid -Lösung, 30 % (w/w), for inorganic trace analysis, for ultratrace analysis
Sigma-Aldrich
Eisen, foil, thickness 0.25 mm, ≥99.99% trace metals basis
Sigma-Aldrich
Wasserstoffperoxid -Lösung, tested according to Ph. Eur.
Eisen, foil, 300x300mm, thickness 0.1mm, hard, 99.5%
Eisen, tube, 200mm, outside diameter 8.0mm, inside diameter 5mm, wall thickness 1.5mm, annealed, 99.5%
Eisen, rod, 200mm, diameter 25mm, as drawn, 98+%
Eisen, foil, 100x100mm, thickness 0.125mm, as rolled, 99.99+%
Eisen, foil, 100x100mm, thickness 1.0mm, as rolled, 99.5%
Eisen, rod, 100mm, diameter 100mm, as drawn, armcO« soft ingot 99.8%
Eisen, foil, 150x150mm, thickness 1.5mm, as rolled, 99.5%