VVPP01205

Durapore^® Microfiltration Membrane

hydrophilic

• UNSPSC-Code: 40161507
• NACRES: NB.24

Eigenschaften

• Materialien: PVDF membrane
• Qualitätsniveau: 400
• Sterilität: non-sterile
• Leistungsmerkmale: hydrophilic
• Parameter: 0.15 L/min-cm² air flow rate; 2.5 mL/min-cm² water flow rate
• Dicke: 103 μm
• Matrix: Durapore^® PVDF
• Porengröße: 0.1 μm pore size
• Blasenpunkt: 73 psi at 23 °C

Beschreibung

Allgemeine Beschreibung

The Durapore^® membrane provides high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophilic Durapore^® membranes bind far less protein than nylon, nitrocellulose or PTFE membranes. The 0.1 μm pore size hydrophilic membrane is designed and manufactured for removal of particles and organisms
larger than 0.1 μm. The membrane may be sterilized by in-line steaming or autoclaving up to 135°C, 30 psig, for 45 minutes. Integrity testing of the membrane may be determined by either the diffusional flow or the bubble point test.

Sonstige Hinweise

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration
• Application: Microfiltration
• Intended Use: Reduction or removal of microorganism
• Instructions for Use: The 0.1 μm pore size hydrophilic membrance removes particles and microorganisms larger than 0.1 μm in size.
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Rechtliche Hinweise

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany