CN1201E06

Polygard^® CN Kartuschenfilter

pore size 1.2 μm, cartridge nominal length 10 in. (25 cm), Code 0 (2-222; O-rings)

• Synonym(e): Polygard-CN Cartridge Filter 10 in. 1.2 µm Code 0 Ethylene-Propylene
• UNSPSC-Code: 23151806
• eCl@ss: 32031690

Eigenschaften

• Materialien: EPR seal; polypropylene
• Qualitätsniveau: 400
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Polygard
• Parameter: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• Nennlänge Kartusche: 10 in. (25 cm)
• Durchmesser: 7.0 cm (2.75 in.)
• Filtrationsfläche: 0.42 m²
• Verunreinigungen: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤50 mg
• Porengröße: 1.2 μm nominal pore size; 1.2 μm pore size
• Aufnahme: sample type liquid
• Kartuschencode: Code 0 (2-222; O-rings)

Beschreibung

Allgemeine Beschreibung

The Polygard^® CN Cartridge Filter products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard^®-CN filter media minimizes pressure differentials during the filtration process, a 1.2 μm pore size and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Polygard-CN cartridge filters provide high throughput with 4.8 bar max. differential pressure (70 psid) at 25 °C Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.

Typical Applications
Polygard-CN cartridge filters are widely used in the beverage industry for liquid and gas filtration applications, for fining operations and bioburden reduction.

Regulatory Compliance
Polygard^® CN Cartridge Filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each cartridge filter is marked with identifying characteristics.

Multiple Formats Available
A full range of Polygard^® CN Cartridge Filter sizes is available to suit your application requirements. A variety of connection options are offered for easy adaptation to existing housings.

Angaben zur Herstellung

Sanitization Protocol
30 min mit 80 °C heißem Wasser

Sterilization Method
10 Autoklaven- oder In-situ-Dampfsterilisationszyklen von 30 min bei 126 °C

Hinweis zur Analyse

Erfüllt die Anforderungen des USP-Tests auf oxidierbare Substanzen nach Durchspülen mit ≥5 l Wasser

Gravimetric Extractables: after 24-h soak in water

Sonstige Hinweise

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Rechtliche Hinweise

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany