1.52062

Chromolith^® RP-18 endcapped (monolithic) HPLC Columns

L × I.D. 50 mm x 2 mm HPLC Columns Validation Kit (3 Columns from 3 different batches)

• Synonym(e): Chromolith^® RP-18 endcapped 50-2 HPLC columns Validation Kit (3 columns from 3 different batches)
• UNSPSC-Code: 41115700
• NACRES: SB.52

Eigenschaften

• product name: Chromolith^® RP-18 endcapped, L × I.D. 50 mm x 2 mm HPLC columns Validation Kit (3 columns from 3 different batches)
• Materialien: PEEK column
• Qualitätsniveau: 100
• Agentur: suitable for USP L1
• Produktlinie: Chromolith^®
• Leistungsmerkmale: endcapped
• Verpackung: pkg of 3 ea
• Kennzeichnungsgrad: 18% Carbon loading
• Parameter: 200 bar pressure; 45 °C max. temp.
• Methode(n): LC/MS: suitable; UHPLC-MS: suitable; UHPLC: suitable; mass spectrometry (MS): suitable (High)
• Säule L × ID: 5 cm × 2 mm
• Matrix: monolithic silica
• Aktive Matrixgruppe: C18 bonding phase
• Porengröße: 1.5 μm macroporosity; 13 nm mesoporosity
• operating pH range: 2-7.5
• Trenntechnik: reversed phase
• Lagertemp.: no temp limit

Beschreibung

Allgemeine Beschreibung

Chromolith^® RP-18 endcapped 50-2 HPLC columns Validation Kit consists of 3 columns from 3 different manufacturing batches.
Chromolith^® columns are made of monolithic silica with a characteristic bimodal pore structure.

Chromolith^® RP-18 endcapped 50-2 columns have macropores with 1.5 μm diameter, giving a column efficiency exceeding 100,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith^® RP-18 endcapped 50-2 columns fall under the USP L1 Classification. The column efficiency is comparable to a 3-4 μm particle size fully porous particulate column. Chromolith^® RP-18 endcapped 50-2 columns are perfectly suitable for LC-MS applications.
The column dimension of 50 mm length and 2 mm I.D. is the best choice for fast separations on any U/HPLC System.

The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity

The recommended Guard-columns are:
Chromolith^® RP-18 endcapped 5-2 guard cartridges (3 pieces) [1.52009] with the Chromolith^® Guard Cartridge Holder (kit) 5 mm x 2 mm [1.52004]
The Chromolith^® column coupler can be used to significantly increase the separation efficiency of Chromolith^® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]

Learn more:
Brochure: Race through your Separations on Any System. Chromolith^® Monolithic Silica HPLC Columns

All Supelco HPLC Columns, including monolithic Chromolith^® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument

Rechtliche Hinweise

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany