Accéder au contenu
MilliporeSigma

High efficiency polyethylene glycol diacrylate monoliths for reversed-phase capillary liquid chromatography of small molecules.

Journal of chromatography. A (2014-09-07)
Pankaj Aggarwal, John S Lawson, H Dennis Tolley, Milton L Lee
RÉSUMÉ

Highly cross-linked monolithic networks (i.e., polyethylene glycol diacrylate, PEGDA) synthesized from monomers containing varying ethylene oxide chain lengths were fabricated inside fused silica capillary columns for use in liquid chromatography (LC) of small molecules. Tergitol was used as a surfactant porogen in combination with other typical organic liquid porogens. Column performance was correlated with quantitative descriptors of the physical/chemical properties of the monomers and porogens using a statistical model. Solubility and viscosity values of the components were identified as important predictors of monolith morphology and efficiency. The chromatographic retention mechanism was determined to be principally reversed-phase (RP) with additional hydrogen bonding between the polar groups of the analytes and the ethylene oxide groups embedded in the monolith structure. The fabricated monolithic columns were evaluated under RPLC conditions using phenols, hydroxy benzoic acids, and alkyl parabens as test compounds. Isocratic elution of hydroxy benzoic acids at a linear velocity of 0.04 cm/s using a PEGDA-700 monolith gave chromatographic peaks with little tailing (i.e., tailing factor<1.28). The chromatographic efficiency measured for a non-retained compound (uracil) using this column was 186,000 plates/m when corrected for injector dead volume. High resolution gradient separations of selected pharmaceutical compounds and phenylurea herbicides were achieved in less than 18 min. Optimized monoliths synthesized from all four crosslinking monomers exhibited high permeability and demonstrated little swelling or shrinking in different polarity solvents. Column preparation was highly reproducible, with relative standard deviation (RSD) values less than 2.1%, based on retention times of the phenol standards (3 different columns).

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
3-(Trimethoxysilyl)propyl methacrylate, 98%
Sigma-Aldrich
Phénol solution, Equilibrated with 10 mM Tris HCl, pH 8.0, 1 mM EDTA, BioReagent, for molecular biology
Sigma-Aldrich
Gallic acid, 97.5-102.5% (titration)
Supelco
Méthylparaben, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Acétaminophène, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Indomethacin, 98.5-100.5% (in accordance with EP)
USP
Acétaminophène, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Ethyl 4-hydroxybenzoate, ReagentPlus®, 99%
Sigma-Aldrich
2,2-Dimethoxy-2-phenylacetophenone, 99%
Supelco
Propylparaben, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
3-(Trimethoxysilyl)propyl methacrylate, ≥97%
USP
Méthyl 4-hydroxybenzoate, 4-hydroxybenzoate de méthyle, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Phénol solution, BioReagent, Saturated with 0.01 M citrate buffer, pH 4.3 ± 0.2, for molecular biology
Sigma-Aldrich
Salicylic acid, ACS reagent, ≥99.0%
Sigma-Aldrich
Phénol, ≥99%
Sigma-Aldrich
Phénol, puriss. p.a., ACS reagent, reag. Ph. Eur., 99.0-100.5%
Supelco
Salicylic acid, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
3,4-Dihydroxybenzoic acid, ≥97.0% (T)
Sigma-Aldrich
Butyl 4-hydroxybenzoate, ≥99.0% (GC)
Sigma-Aldrich
Méthyl 4-hydroxybenzoate, 4-hydroxybenzoate de méthyle, ReagentPlus®, ≥99.0%, crystalline
Sigma-Aldrich
Phénol solution, ≥89.0%
Supelco
Méthyl parabène, PESTANAL®, analytical standard
USP
Propylparaben, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Resorcinol, ACS reagent, ≥99.0%
Sigma-Aldrich
Phénol, natural, 97%, FG
Sigma-Aldrich
Acétaminophène, BioXtra, ≥99.0%
Sigma-Aldrich
3-Hydroxybenzoic acid, ReagentPlus®, 99%
Supelco
Ethylparaben, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Salicylic acid, ≥99%, FG
Sigma-Aldrich
Phénol, for molecular biology