Accéder au contenu
MilliporeSigma
Toutes les photos(4)

Principaux documents

Voir toute la documentation

215619

Sigma-Aldrich

Silicon

powder, −325 mesh, 99% trace metals basis

Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme

Sélectionner une taille de conditionnement

50 G
72,00 $
250 G
168,00 $
1 KG
539,00 $

72,00 $

Disponible pour expédition le07 avril 2025Détails

Devis pour commande en gros
Toutes les photos(4)

Sélectionner une taille de conditionnement

Changer de vue
50 G
72,00 $
250 G
168,00 $
1 KG
539,00 $

About This Item

Formule linéaire :
Si
Numéro CAS:
7440-21-3
Poids moléculaire :
28.09
Numéro CE :
231-130-8
Numéro MDL:
MFCD00085311
Code UNSPSC :
12141911
ID de substance PubChem :
24852908
Nomenclature NACRES :
NA.23

72,00 $

Disponible pour expédition le07 avril 2025Détails

Devis pour commande en gros

Essai

99% trace metals basis

Forme

powder

Taille des particules

−325 mesh

pb

2355 °C (lit.)

Pf

1410 °C (lit.)

Densité

2.33 g/mL at 25 °C (lit.)

Chaîne SMILES 

[Si]

InChI

1S/Si

Clé InChI

XUIMIQQOPSSXEZ-UHFFFAOYSA-N

Vous recherchez des produits similaires ? Visite Guide de comparaison des produits

Catégories apparentées

Description générale

Silicon powder is a fine, gray powder. This silicon powder has been passed through a 325-mesh screen, meaning that the particles are small enough to pass through a sieve with openings that are approximately 44 thousandths of an inch in diameter. Silicon is a chemical element and is a hard, brittle, metallic-gray solid that is highly resistant to chemical attack and has a high melting point. Silicon is the second most abundant element in the Earth’s crust and is found in a variety of minerals.

Application

Silicon can be used as anode material in lithium-ion batteries.

It can be used to fabricate Al2O3-C refractories. The silicon powder generates β-Sialon whiskers which imparts high-temperature strength, slag resistance and thermal shock resistance of the refractories.

It can be incorporated into high-densitypolyethylene (HDPE) polymer composites. The addition of silicon powder enhancesthermal stability and thermal conductivity of composites.

Pictogrammes

Flame
GHS02

Mention d'avertissement

Warning

Mentions de danger

H228

Classification des risques

Flam. Sol. 2

Code de la classe de stockage

4.1B - Flammable solid hazardous materials

Classe de danger pour l'eau (WGK)

WGK 3

Point d'éclair (°F)

Not applicable

Point d'éclair (°C)

Not applicable

Équipement de protection individuelle

Eyeshields, Gloves, type N95 (US)

Faites votre choix parmi les versions les plus récentes :

Certificats d'analyse (COA)

Lot/Batch Number
MKCT8391
MKCR9919
MKCP7149
MKCK6629
MKCG5658

Vous ne trouvez pas la bonne version ?

Si vous avez besoin d'une version particulière, vous pouvez rechercher un certificat spécifique par le numéro de lot.

Rechercher un(e) COA

Déjà en possession de ce produit ?

Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.

Consulter la Bibliothèque de documents

Les clients ont également consulté

Slide 1 of 4

1 of 4

Silicon powder, 45 max. part. size (micron), weight 100 g, high purity 99.998%

GF64953614

Silicon

Silicon powder, max. particle size 45 micron, weight 50 g, high purity 99.998%

GF46525620

Silicon

Silicon powder, 150 max. part. size (micron), weight 200 g, purity 97.5%

GF63403152

Silicon

Silicon monoxide powder, −325 mesh

Sigma-Aldrich

262951

Silicon monoxide

Jaewoo Lee et al.
Journal of nanoscience and nanotechnology, 13(5), 3495-3499 (2013-07-19)
A spin-casting process for fabricating polycrystalline silicon sheets for use as solar cell wafers is proposed, and the parameters that control the sheet thickness are investigated. A numerical study of the fluidity of molten silicon indicates that the formation of
Jae Cheol Shin et al.
Journal of nanoscience and nanotechnology, 13(5), 3511-3514 (2013-07-19)
We have characterized the structural properties of the ternary In(x)Ga(1-x)As nanowires (NWs) grown on silicon (Si) substrates using metalorganic chemical vapor deposition (MOCVD). Au catalyzed vapor-liquid-solid (VLS) mode was used for the NW growth. The density of the In(x)Ga(1-x)As NW
Seungil Park et al.
Journal of nanoscience and nanotechnology, 13(5), 3397-3402 (2013-07-19)
We investigated the thin film growths of hydrogenated silicon by hot-wire chemical vapor deposition with different flow rates of SiH4 and H2 mixture ambient and fabricated thin film solar cells by implementing the intrinsic layers to SiC/Si heterojunction p-i-n structures.
Chengyong Li et al.
Journal of nanoscience and nanotechnology, 13(3), 2272-2275 (2013-06-13)
Mesoporous Si-C-O fibers were fabricated by air activation of a kind of carbon-rich SiC-C fibers at 600 degrees C. The SiC-C fibers were prepared from the hybrid precursor of polycarbosilane and pitch through melt-spinning, air curing and pyrolysis in nitrogen.
Min Joon Huang et al.
Journal of nanoscience and nanotechnology, 13(6), 3810-3817 (2013-07-19)
In this work, we demonstrated a silicon nanowire (SiNW) biosensing platform capable of simultaneously identifying different Dengue serotypes on a single sensing chip. Four peptide nucleic acids (PNAs), specific to each Dengue serotypes (DENV-1 to DENV-4), were spotted on different
Afficher tous les articles scientifiques apparentés

Articles

Self-Propagating Reactions Induced by Mechanical Alloying

An article concerning self-propagating reactions induced by mechanical alloying, presented by Sigma-Aldrich.com.

Recent Developments in Silicon Anode Materials for High Performance Lithium-Ion Batteries

Recent demand for electric and hybrid vehicles, coupled with a reduction in prices, has caused lithium-ion batteries (LIBs) to become an increasingly popular form of rechargeable battery technology.

Silicides: Promising Thermoelectrics

Higher transition metal silicides are ideal for anisotropic thermoelectric conversion due to their Seebeck coefficient anisotropy and mechanical properties.

Electrode Materials for Li-ion Batteries

Solid oxide fuel cells and electrolyzers show potential for chemical-to-electrical energy conversion, despite early development stages.

Afficher tout

Questions

1–3 of 3 Questions  

  1. How can I determine the shelf life / expiration / retest date of this product?

    1 answer

    1. If this product has an expiration or retest date, it will be shown on the Certificate of Analysis (COA, CofA). If there is no retest or expiration date listed on the product's COA, we do not have suitable stability data to determine a shelf life. For these products, the only date on the COA will be the release date; a retest, expiration, or use-by-date will not be displayed.
      For all products, we recommend handling per defined conditions as printed in our product literature and website product descriptions. We recommend that products should be routinely inspected by customers to ensure they perform as expected.
      For products without retest or expiration dates, our standard warranty of 1 year from the date of shipment is applicable.
      For more information, please refer to the Product Dating Information document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/449/386/product-dating-information-mk.pdf

      Helpful?

  2. How is shipping temperature determined? And how is it related to the product storage temperature?

    1 answer

    1. Products may be shipped at a different temperature than the recommended long-term storage temperature. If the product quality is sensitive to short-term exposure to conditions other than the recommended long-term storage, it will be shipped on wet or dry-ice. If the product quality is NOT affected by short-term exposure to conditions other than the recommended long-term storage, it will be shipped at ambient temperature. As shipping routes are configured for minimum transit times, shipping at ambient temperature helps control shipping costs for our customers. For more information, please refer to the Storage and Transport Conditions document: https://www.sigmaaldrich.com/deepweb/assets/sigmaaldrich/marketing/global/documents/316/622/storage-transport-conditions-mk.pdf

      Helpful?

  3. Are individual particles single- or poly-crystalline?

    1 answer

    1. This silicon powder is polycrystalline in structure.

      Helpful?

Reviews

No rating value

Active Filters

Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..

Contacter notre Service technique