When using polycarbonate bottles, it is recommended to autoclave and/or use radiation for sterilization. Before autoclaving, it is important to thoroughly rinse the products to avoid crazing and spotting caused by detergent residues. The autoclaving cycles should be limited to 20 minutes at 121°C, as repeated autoclaving can lead to a loss of mechanical strength, affecting its performance under high-stress applications such as centrifugation. It is not advisable to expose these vessels to high stresses such as vacuum application or centrifugation. Dishwashers can be used with all resins, except for LLDPE, acrylic, and PS, due to temperature limitations. The maximum recommended use temperature for polycarbonate is 115°C - 138°C. Repeated washing of polycarbonate vessels in the dishwasher can weaken the strength of the bottles. Detailed information and recommendations on autoclaving and a table of resin properties with recommended sterilization methods can be found in our Nalgene technical guide, specifically on page 16 and 19.
TMO383423-42
Nalgene® Certified Clean Biotainer(TM) Carboys
polycarbonate, volume 20 L, case of 3 ea
Sinônimo(s):
biotainer carboy, certified nalgene carboy, sterile carboy
Selecione um tamanho
R$ 6.363,00
Selecione um tamanho
About This Item
R$ 6.363,00
Produtos recomendados
Materiais
polycarbonate
embalagem
case of 3 ea
fabricante/nome comercial
Nalgene 383423-42
volume
20 L
20000 mL
Procurando produtos similares? Visita Guia de comparação de produtos
Descrição geral
Características e benefícios
- Provided sterile and ready-to-use; including certified clean products, which meet USP<788> standards and endotoxins below 0.5 EU/mL
- Certified clean products include triple layer packaging, with two heat-sealed layers to facilitate ease of entry into cleanrooms
- Sterility Assurance Level of 10-6 inside the bottle/closure
- Robust, PC can be used from -100°C to 100°C, allowing for both heated mixing and frozen storage or shipment. Must be tested in actual use conditions as results may vary depending upon application.
- Inspection procedures throughout manufacturing include leak testing, dimensional testing, visual inspection for particulates and release testing to ensure the product meets all specifications.
- All container/closure systems are certified leakproof** to protect valuable contents
Informações legais
Escolha uma das versões mais recentes:
Certificados de análise (COA)
It looks like we've run into a problem, but you can still download Certificates of Analysis from our Documentos section.
Se precisar de ajuda, entre em contato Atendimento ao cliente
Já possui este produto?
Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.
-
Can you provide information on the sterilization method for product TMO383423-42?
1 answer-
Helpful?
-
Active Filters
Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.
Entre em contato com a assistência técnica
